5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version
5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version
Remote Control DC Input Motion Sensor
Motion Sensor Module DC Input
HNS111
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≧25mA.
Features
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≧25mA.
5V DC high-low voltage & PWM output signal(0~10v version available on request)
Super compact, flexible to be integrated into any suitable fixtures.
Dual - PD technology, real Lux -Off & Daylight monitoring function for built-in application.
IR remote commissioning, easy setting and user friendly.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20℃ ~ +70 ℃
RoHS compliant.
Settings(Remote control IR12)
Permanent ON/OFF function
Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled.
*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.
Dim +/-
Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.
*after desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.
Sensor mode
Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press "Reset" button, all settings go back to factory default settings.
Factory default settings－－
Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
Ambient learn
Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.
*Test mode defaulted settings—
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Remote Control Microwave Sensor | Remote Control Microwave Sensor Microwave Motion Sensors AC Input AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable HN... |
 |
Highbay DC Input Motion Sensor | 5V/12V DC Input Microwave Motion Sensor – Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB Input vol... |
 |
Remote Control DC Input Motion Sensor | Remote Control DC Input Motion Sensor Motion Sensor Module DC Input 5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version ... |
 |
Microwave Motion Sensor Antenna Module | Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. Patch antenna, antenna gain: 2 dBi. Beam aper... |
 |
Microwave Motion Sensors AC Input | Remote Control Microwave Sensor Microwave Motion Sensors AC Input AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable HN... |
Похожие товары
 |
China manufacturer Pressure Gauge HS75668 for power generation | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Pressure Gauge HS75668 for power generationIt is YOYIK special sale. Deyang Y... |
 |
"China factory Vacuum Switch HS70595 for power station | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Vacuum Switch HS70595 for power station Our company mainly serves thermal power pl... |
 |
China made TSI Preamplifier CON021/916-240 for power plant | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China made TSI Preamplifier CON021/916-240 for power plantDongfang Yoyik has advanced technology ... |
 |
China manufacturer Preamplifier for power generation | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Preamplifier for power generationIs to use the generator sets of professiona... |
 |
China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generator | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generatorSold by YOYIK. Dey... |
