Automatic Interchanged Steel Purlin Roll Forming Machine Profiled Steel Roll Forming Machines
The profile drawing for Steel Purlin Roll Forming Machine The thickness of Material: 1.5-3.0mm Working flow:Uncoiler--Feeding--Leveling--hydraulic punching--Hydraulic cutting--Roll forming--Output table Character of main structure
a) The structure of the Steel Purlin Roll Forming Machine is simple and the appearance of the Steel Purlin Roll Forming Machine is beautiful because we adopt the shape-steel structure and most of the connecter is screw which make the machine flexible and stronger.
b) All the components of Steel Purlin Roll Forming Machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.
c) We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming.
d) Steel Purlin Roll Forming Machine is very easy to install the equipment and suitable for producing in the factory.
e) Low noise with high efficiency f) The width of the profile can be automatic adjusted and the last 10 roller stations can be overturned to make C&Z purlin Main Specification A. 5T manual decoiler
1) Capacity: 5ton
2) Loading width: MAX 500mm
3) Valid expanding range for coil inner diameter: 480-520mm B. Main roll forming system
1) Main motor power: 15kw
2) Feeding and leveling power: 4KW
3) Hydraulic power:5.5KW
4) Hydraulic pressure: 20Mpa
5) Punching: Hydraulic pre-punching before forming,
6) Punching mould:Cr12mov
7) Cutting: Hydraulic pre-cutting before forming, Auto cutting when reach the set length.
8) Cutting blade: Cr12mov
9) Cutting tolerance: +/- 1.5mm
10) Drive: Chain
11) Roller material: Gcr15 steel and quench treatment hardness 58-62, chrome coated 0.05mm
12) Leveling rollers: 7rollers(three upper and four lower)
13）Roll station: 16groups
14）Raw material: 1.5-3.0mm,pre-galvanized strip steel
15）Valid width after fromed: 100mm-300mm
16) Motor for width adjusting: 4.5KW(1.5KW*3)
17) Working speed: 10m--15m/min(Exclude cutting time)
18) Length Tolerance: ±1.5mm
19) Weight of machine: about 14ton
20) Size of machine: About 11000×1800×1800mm L x W x H
21）Color of machine: depend on customer
22) Coder: Omron
23) Control: PLC Panasonic, made in Japan. 380V 50HZ
24) Computer operating panel: touching screenOur Qualification Exhibition After sales service:
1).Engineer will give free training lessons to labors in buyer’s factory.
2).The Buyer will buy the round-trip air ticket for Engineer if visa application is approved.
3).The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.
4).During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
5).We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
Другие товары поставщика
|
|
|
The profile drawing of Z Purlin Roll Forming Machine Working flow: Uncoiler—Feeding—Leveling--roll forming---Punching ---hydraulic cut to length—... |
|
|
|
The profile drawing for steel rack shelf roll forming machine The thickness of Material: 1.5-2.5mm Working flow: uncoiler—Leveling—Punching--roll... |
|
|
|
Working flow: Decoiler--feeding--punching--roll forming--cut to length--output table Equipment list for C stud roll forming machine: NO.Prod... |
|
|
|
Brief Introduction of the Line Φ60High-Frequency Welded Pipe Production Line is able to produce welded pipes ofΦ17~Φ60mm in diameter and 0.7~3.0mm ... |
|
|
|
Working flow for Steel Coils Slitting Line: Hydraulic decoiler—transmission---slitting----correcting and damping—Auto hydraulic recoiler Component... |
Все товары поставщика
Похожие товары
