master controller for crane
KT14 Series Cam controllers (hereinafter referred to as controllers) are used in AC 50Hz voltage to 380V circuit, mainly as crane AC motor starting and printing direction. The controller has reversible and symmetrical circuit, which is suitable for the translation mechanism and lifting mechanism of cranes, and can also be used for starting, commutating and adjusting the same type of motor. The KT14-25J/1 and KT14-60J/1 controllers are used to control a three phase wound rotor induction motor. The KT14-25J/2 and KT14-60J/2 controllers are used to control two three-phase wound rotor induction motors at the same time. The KT14-25J/3 controller is used to control a three-phase squirrel cage induction motor. The KT14-60J/4 controller is a contactor which controls two three-phase wound induction motors without stator circuit.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
|
|
blue joystick parts contact | blue joystick parts contact is joystick parts |
|
|
crane cabin with air conditioner | crane cabin with air conditioner are applicable to circuit of AC 50Hz(60Hz),380V(440V). |
|
|
high resistance neutral grounding resistor | ZX15 series resistors are open type, suitable for AC 50Hz, voltage up to 660V and DC voltage to 440V or less for start, speed, brake, discharge and... |
|
|
speed ac cam controller | work environment The controller is applicable to the following working conditions The altitude is not more than 1000 meters. The temperature of ... |
|
|
industrial joystick parts contact | industrial joystick parts contact is joystick parts |
