Auto Pneumatic Driller For Water Jet Cutting Machine
The following conditions need to use Auto Pneumatic Driller1. When cutting the composite material, The high pressure water will intrude into the middle of the interlayer and destroy interlayer. it is necessary to drill a small hole firstly, then start water jet cutting from the hole. 2. When programe need to cut lots of small holes by waterjet, then it is necessary and much faster to use a driller to drill all the holes. However the Teenking water jet have already combined driller with waterjet cutting, automatic drill and shift to cut by program.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
5 axis beveling cutting head1. use absolute encoder servo motor drive, keep high accuracy, no more calibration. 2. Hyperthem Dialine 2 cutting head... | |
|
|
TK 90k Psi Intensifier Ultra High Pressure Pump For Water Jet Machine | 600MPA intensifierTEENKING 600MPA pump is the first one in China with the best stability. It is adopted whole imported intensifier, plus Teenking U... |
|
|
Water Jet Cutting Maching Tank Under Water Grids | Grid salver under grates：The small part will drop into the water capture by the waterjet stream and difficult to find. with TEENKING stainless stee... |
|
|
High Pressure Switch Cylinder For Water Jet Cutting | high pressure switch cylinder for water jet cutting |
 |
Ⅰ. Introduction:IGEMS is a CAD/CAM software design for Abrasive WaterJet Cutting. Beware of that TEENKING machines support all features described i... |
