Pit Furnace
Usage:pit-furnace is often used for heat treatment, it can be Normalizing, tempering, quenching and Hardening.Parameter:Range temperature : 950°C~1300°CTemperature Uniformity : < 5℃<4.5℃ in the effective heating hot zone.Max uniform heating rate: 10℃/min from 500 to 1000℃Heating Element:Heating elements shall be made of Ni-Cr resistance wire or equivalent(Preferable Kanthal A-L embedded heating elements) and shall be suitably arranged（Circular/Rectangular fashion all around the hot zone）to achieve a temperature uniformity of ±5℃ in the effective hot zone. The elements will be easily removable for servicing and maintenance.Heat insulation: The heater shall be insulated with radiation shield made out of concentric metal shields(stainless steel etc).Heat insulation shall be securely fixed with the help of high alumina hardware. There are multi layer of radical, front, and rear shields provided to minimize the heat loss. The skin temperature of the furnace shall not exceed 30-40℃Power: 3phase, 380V, 50Hz. Controls and Instrumentation:Digital Temperature Programmable Controller: Microprocessor based digital PID temperature controller of latest model with which work in conjunction with K-type thermocouple should be provided for measurement and control of the temperature in the furnace.Over Temperature Controller: Over Temperature Controller could be provided to safe guard the furnace from over shoof of temperature from the set temperature.PLC: PLC could be provided for aver all control of all furnace components, interlocking of all process parameters and temperature cycle.Manual Mode of Operation: A manual mode of operation that bypasses microprocessor control and cnabic total manual mode could be provided.Temperature measurement and control: Two additional thermocouple of K-type can be provided in the hot zone to monitor temperature measurements and control.Huachang Metallurgical, one of the professional manufacturers, now brings you high quality and high precision pit furnace from its professional factory. We are also a successful and experienced supplier and exporter of pit furnace. We have qualified and experienced staff as well as advanced equipment, you can rest assured to get products with us.
Другие товары поставщика
|
|
|
Usage:Ladle Baking Device is used for baking ladle before taking molten steel in. Characteristic:Fuel Medium: natural gas, all gas, light diesel o... |
|
|
|
DescriptionWater cooled cable is a hollow water, special cable for high current heating equipment, usually by electrode (cable head), a conducting ... |
|
|
|
Usage:Batch-type furnace is often used for heat treatment, it can be Normalizing, tempering, quenching and Hardening.Parameter:Range temperature : ... |
|
|
|
UsageSubmerged Arc Furnace is used for many kinds of ferroalloy smelting,Website:, including Ferrotungsten, High-carbon Ferromanganese, Ferrosilico... |
|
|
|
(1) Less volume,Website:, lighter weight, high efficiency and less power consumption. (2) Lower temperature, less dust around the furnace. (3) Simp... |
Все товары поставщика
Похожие товары
|
|
электроизоляционные материалы и запчасти трансформатора |
Продавец: Longsper insulation technology(TIANJIN)CO.,LTD |
электрокартон
бумага с алмазным пунктиром DDP
бумага эпоксидный препрег DMD
крепированная бума... |
|
|
S тип сплава стальной нагрузочный элемент TSC 50kg для силовых измерительных систем loadcell тестер |
Продавец: Yixing City Sanwei Electric Manufacturing Co., Ltd. |
S тип нагрузки ячейки, напряжение и сжатиеХорошая симметрия вывода, компактная структура, простая... |
|
|
Round Rubber Washer |
Продавец: Ex-proof Cable Gland, EX Cable Glands, Explosion Proof Products, OEM Cable Gland Supplier & Manufacturer China |
O-ring
We are Sealing washer supplier
For use on cable gland entry threads,which is waterproof an... |
|
|
Mo Alloy Powder |
Продавец: Shanghai Laiwu Powder Material Co.,Ltd. |
Mo Alloy Powder,Pre Alloyed Powder |
|
|
Ni-Mo Alloy Powder |
Продавец: Shanghai Laiwu Powder Material Co.,Ltd. |
Ni-Mo Alloy Powder,Website: Alloyed Powder |
