RD Safety Circulating Valve
RD Safety Circulating Valve
RD safety Circulating Valve is mainly used to seal oil-gas layer when the formation test ends and carry on cycle operation. At the same time, the ball valve of RD relief circulating valve and test valves could trap some formation fluid samples. In downhole operation, this valve will not be closed again after being opened. As a relief valve, the tool can be operated at any one time during the testing progress to blank off the test string. If four circulating ports of RD relief circulating valve is blocked, the valve can be used one-time shut-in valve.
Technical parameter
Specifications/"
3-7/8"
5"
OD (mm)
99
127.5
Drift OD (mm)
45
57
Total length (mm)
1883
1847
Working pressure (Mpa)
70
70
Working temperature (°C)
-29~+177
-29~+177
Resistance to Tension (KN)
1147
2430
Internal Pressure Strength (Mpa)
107
132
Outer Pressure Resistance (Mpa)
90
123
Torque Strength (KN.m)
12
35
Binding Screw Thread
2-7/8" CAS & 2-7/8" EU
3-7/8"CAS & 3-1/2" IF
Другие товары поставщика
|
|
Forgings
Shape
... |
|
|
The crosshead and crosshead guide are made of ASTM A48-83 meehanite cast iron featured by good abrasion resistance and long service life.The connec... |
|
Оборудование для испытания пластов-Клапан циркуляционный ( Клапан типа RTTS) |
RTTS Circulating Valve
RTTS Circulating valve is a locked-open/locked-closed valve that serves for opening and closing holes. The valve c... |
|
|
CastingsFormation:Castings are formed by liquid material poured into a mold, which contains a hollow cavity of the desired shape, and then allowed ... |
|
|
Description:BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclo... |
Все товары поставщика
Похожие товары