One Channel Cat5 Active CCTV UTP Video Balun (VB120R)
One Channel Cat5 Active CCTV UTP Video Balun (VB120R)Description:The VB120R 1ch active UTP video receiver receives balanced signal to convert it into unbalanced signal and raises the received signal with perfect receiving effect,Website:, which can be applied in the occasions such as video monitoring and video meeting. It can simplify the wiring project and save wire use quantity.Features:1. Adopt differential signal transmission with excellent anti-jamming ability2. Save project wire expenses, each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal3. The farthest transmission distance will be 900m if it is used with passive transceiver and the farthest transmission distance can reach 1200m if it is used with active transmitter 4. Outstanding interference rejection, transient protection5. Aluminum alloy caseTechnical specifications:One Channel Cat5 Active CCTV UTP Video Balun (VB120R)Video FormatNTSC, PAL, and SECAM Frequency ResponseDC to 6MHzAttenuation0.5dB typCMRR60 dB ImpedanceCoax, Male BNC75 ohms RJ45/Terminal Block100 ohmsWorking environmentWorking Temperature-10℃ to +70℃Storage Temperature-30℃ to +70℃Humidity 0 to 95%Wire TypeUTP5ConnectorFemale BNC and Terminal BlockPower12VDCCaseAluminum alloy caseDimension82mm*79mm*29mmWeight108g/pcType of the required wire:Unshielded Cat-5 or above twisted pair wire (Please use standard Cat-5 or above twisted pair wire. The wire quality will directly affect the transmitted image effect and transmission distance.)Characteristic impedance: 100Ω±20ΩDC loop resistance: 18Ω/100mDifferential capacitance: 62pf/m (Maximum)Connection method:Connect the two-color wires of a pair of Cat-5 unshielded twisted pair wire to the '+’ terminal of the yellow socket and connect the single-color wires to the '-’ terminal. Connect the BNC interface of the receiver to the monitor or other recording equipments. If there is any joint in the circuit, please adopt welding method or special junction box to ensure perfect contact at the joint.Adjusting method:Adjust "BRIGHTNESS" knob to adjust the image brightness, then adjust "SHARPNESS" dial switch to compensate the image sharpness and color. The compensation size in turn is 1 as minimum and 4 as maximum. Pressing dial switch shows the compensation of this position is turned on. Next or multiple switches can be pressed according to the requirements. The four dial switches can compose 16 compensation values (as shown in the following figure) to meet the requirements of different transmission distances.Frequently Asked QuestionsWhy does my video look like a scrambled Cable TV signal?This typically indicates reversed polarity. Can shielded twisted pair be used?Some customers have successfully used shielded wire up to a few hundred feet. However we does not recommend it. Its high-frequency roll-off will severely degrade the distance performance. Can Category 6 wire be used?Yes. Unshielded Twisted Pair wire, Category 5 or better, can be used with UTP video transceiver.Can I transmit more than one video signal in a multi-pair wire bundle?Yes. One of the benefits of using UTP video transceivers is interference rejection. UTP video signals can reside in the same wire bundle as multiple video signals, ringing teles, Ethernet, low voltage power, RS-422, RS-485, etc.
Другие товары поставщика
|
|
|
16ch Active CCTV Video Balun Receiver with Terminal Block (VB1610JR)Description:The VB1610JR active video receiver receives balanced signal to conv... |
|
|
|
4.3" Universal Touch Screen IP Camera Test Monitor ,Website:, CCTV Test Monitor with Video Display for IP CameraDescription:Video display for Analo... |
|
|
|
8FE POE + 3 Gigabit Uplink Network POE Switch (POE0830B-2) POE0830B-2 is applied to POE IPC camera,Website:, POE WIFI AP, and POE IPPHONE, and easy... |
|
|
|
120W 24VDC 5A CE(LVD & EMC) & IEC60950 Desktop Type CCTV Power Supply S2450D Descrition:The CCTV power supply is primarily designed for WUF-GV, PTZ... |
|
|
|
Description:8GE POE.Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.16G bus, applies to 100-500W IPC camera.Comply to POE IEEE 802.3af/at standard,... |
Все товары поставщика
Похожие товары
