1ch Active Video/Audio/Data Transmitter (VB302T)
1ch Active Video/Audio/Data Transmitter for CCTV Cameras (VB302T)
Description:The VB302T active UTP video Transmitter converts the unbalanced signal into balanced signal and transmits the signal after pre-raise. Receiver receives balanced signal to convert it into unbalanced signal and restores the received signal with one channel of audio transmission function and two channels of data (or standby interface) with perfect receiving effect,Website:, which can be applied in the occasions such as video monitoring and video meeting, simplify the wiring project and save wire use quantity.
Features:1. Adopt differential signal transmission with excellent anti-jamming ability2. Save project wire expenses, each a pair of twisted pair wire transmits one channel of video signal and one common Cat-5 unshielded twisted pair wire can simultaneously transmit four channels of video signal3. The farthest transmission distance can reach 2400m if it is used with active receiver 4. Outstanding interference rejection, transient protection5. Aluminum alloy case
Technical specifications:
1ch Active Video/Audio/Data Transmitter for CCTV Cameras (VB302T)
Video Format
NTSC, PAL, and SECAM
Frequency Response
DC to 8MHz
Attenuation
0.5dB typ
CMRR
60 dB
Impedance
Coax, Male BNC
75 ohms
RJ45/Terminal Block
100 ohms
Working environment
Working Temperature
-10℃ to +70℃
Storage Temperature
-30℃ to +70℃
Humidity
0 to 95%
Wire Type
UTP5
Connector
Female BNC, RJ45 and Terminal Block
Power
12VDC (Max:90mA)
Case
Aluminum alloy case
Dimension
105mm*70mm*29mm
Weight
185g/pc
Type of the required wire:Unshielded Cat-5 or above twisted pair wire (Please use standard Cat-5 or above twisted pair wire. The wire quality will directly affect the transmitted image effect and transmission distance.)Characteristic impedance:100Ω±20ΩDC loop resistance: 18Ω/100mDifferential capacitance: 62pf/m (maximum)
Connection method:Connect the two-color wires of a pair of Cat-5 unshielded twisted pair wire to the '+’ terminal of the green socket and connect the single-color wires to the '-’ terminal of the green socket. Connect the BNC interface of the transmitter to the BNC interface of the camera. If there is any joint in the circuit, please adopt welding method or special junction box to ensure perfect contact at the joint. Please be sure to connect the interface marked with '’ symbol to the ground wire of the lighting-proof system with the copper conductor with sectional area≥1.5 mm2!The clamping order of the modular plug is shown as follows (TIA/EIA-568B):
Adjusting method:Adjust and slide the switch according to the distance. The switch can be slid to the lowest level when the distance is between 1400m and 1700m, the switch can be slid to the middle level when the distance is between 1700m and 2000m and the switch can be slid to the highest level when the distance is more than 2000m (as shown in following figure). This data is the test result of our company with standard unshielded Cat-5 twisted pair wire and it can be applied flexibly according to the actual wire situation in the practical application.
Frequently Asked QuestionsWhy does my video look like a scrambled Cable TV signal?This typically indicates reversed polarity. Can shielded twisted pair be used?Some customers have successfully used shielded wire up to a few hundred feet. However we does not recommend it. Its high-frequency roll-off will severely degrade the distance performance. Can Category 6 wire be used?Yes. Unshielded Twisted Pair wire, Category 5 or better, can be used with UTP video transceiver.Can I transmit more than one video signal in a multi-pair wire bundle?Yes. One of the benefits of using UTP video transceivers is interference rejection. UTP video signals can reside in the same wire bundle as multiple video signals, ringing teles, Ethernet, low voltage power, RS-422, RS-485, etc.
Application Diagram
Другие товары поставщика
|
|
|
120W 24VDC 5A CE(LVD & EMC) & IEC60950 Desktop Type CCTV Power Supply S2450D Descrition:The CCTV power supply is primarily designed for WUF-GV, PTZ... |
|
|
|
Portable RG59/6/11/7 coaxial cable stripper (T5323)Description:1,Website:, This tool is particularly well-suited for stripping difficult insulting ... |
|
|
|
8 POE + 1 Uplink CCTV POE Switch (POE0810B) POE0810B is applied to POE IPC camera,Website:, POE WIFI AP, and POE IPPHONE, and easy for network tran... |
|
|
|
CCTV Crimp Male Connector BNC for 4mm Cable, 3 Pieces (CT5058)Description:BNC Connector: BNC Male Crimp on Connector, 3 piecesMaterial: Body-zinc ... |
|
|
|
10/100/1000Mbps 11 Port Gigabit Switch (SW11G)Description:SW11G is applied to IPC camera,Website:, Wireless AP, and IP Phone, and easy for network ... |
Все товары поставщика
Похожие товары
