12VDC 10Amp CCTV Power Supply Box For 4 Cameras (12VDC10A4P)
12VDC 10Amp CCTV Power Supply Box for 4 Cameras 12VDC10A4P
Descrition:12VDC10A4P: 12VDC 10Amp CCTV Power Supply Box for 4 Cameras
The CCTV power supply is primarily designed for WUF-GV, PTZ and camera of CCTV system. It’s also used for access, building/house control, intrude alarm and other light-current. It is for desktop or wall-mounted installation.
Features:1. Power up to 4 CCTV CCTV surveillance cameras2. 12 Volts DC3. 10 Amp total output4. Max output current up to 2.5Amp/Channel5. 4 individually PTC auto-reset fuses protected outputs6. Switch mode power supply (regulated voltage)7. Integral surge protection8. Individual LED power indication9. Individual PTC reset-able fuses 10. Internal On/off safety power switch with LED indicator11. Beige metal housing
Technical specifications:
Model
12VDC10A4P
Power
120W
Metal Case Dimension
24.5×20.8×8.7cm
Net Weight
2kgs
Input
Input Voltage
110/220VAC
Input Voltage Frequency
50Hz-60Hz
Average Input Current
100Vac≤1.6A
Efficiency
≥80%
Output
Output Voltage
12VDC±5%
Output Current
10A, 4 channels for 4 sets load
Output Ripple Noise(Vp-p)
110mVp-p@25℃/ Rated input voltage & Rated output load
Reply Time of Starting up
≤3S Input 100Vac, Rated output load
Fuse
Type /Rating
PTC 2.5A/60V
Protection
Over Voltage Protection
When over voltage occurs, it will switch to self-protection status to protect the load.
Over Current Protection
When over current occurs, the corresponding channel output will automatically switch to self-protection status, and the other channels output will work normally. When the fault is cleared, it will switch back to normal.
Short-circuit Protection
When short-circuit occurs, the individual PTC fuse will break the circuit. When the fault is cleared, it will switch back to normal automatically.
Circumstances
Working Temperature
0℃-+50℃
Storage Temperature
-20℃-+80℃
RH
20%-90%
Heat Release
Natural heat dissipation
Connection
Input
Three-pin socket
Output
4 channels output
Dielectric Strength
Input to output
1500Vac/60S leakage current≤1.5mA
Input to FG
1500Vac/60S leakage current≤2.0mA
FG to output
500Vac/60S leakage current≤1.5mA
Insulating strength
Input to output
≥20MΩ/500VDC@25℃
Leakage Current
≤0.02mA @AC110V(220V)/25℃
RG
≤0.012Ω@DC8V/25A/25℃
Competitive Advantages:1. This is one of the best 12VDC CCTV power supply boxes on the market for security cameras.2. We replace the cheap "glass fuse" with "PTC" Reset Fuses which will Auto Reset after you fix the short. You don't have to run around town try to find the replacement fuses. All you have to do is to fix the shorts.3. The red light shorts indicator helps you to know which camera is not working.4. Dependable and long lasting5. Warranty: 2 years
Другие товары поставщика
|
|
|
16 Gigabit POE + 2 SFP CCTV Ethernet POE Switch (POE1602SFP-3)
POE1602SFP-3 is applied to POE IPC camera,Website:, POE WIFI AP, and POE IPPHONE, a... |
|
|
|
24VAC 2.5Amp 4 Channel CCTV Camera AC Power Supply 24VAC2.5A4PDescrition:24VAC2.5A4P:1 in 4 Out 24VAC 2.5Amp CCTV Camera Power Supply Box (4 channe... |
|
|
|
4.3" 1080P TFT Color LCD CCTV Tester for AHD ,Website:, TVI, Analog Cameras (CT600AHDTVI) Description:PAL/NTSC Auto Adapt for Analogue Cameras, AHD... |
|
|
|
24VDC 3A CE(LVD & EMC) & IEC60950 Desktop Type CCTV Power Supply S2430D Descrition:The CCTV power supply is primarily designed for WUF-GV,Website:,... |
|
|
|
CCTV Micro for Surveillance System with Low Noise (502C)An affordable highly sensitive CCTV Micro which is small enough to use for covert and appli... |
Все товары поставщика
Похожие товары
