PECO facet Coalescer Cartridges for Aviation

• 

INTRODUCTION:

Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.

The Facet coalescer separator housings equipped with CAA Series 5 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements to EI 1581, Fifth Edition, Category C (Category C replaces the previous class A, B, and C of API 1581 3rdEdition.)

Built for balanced fluid flow-thru and structural strength, each CAA Series 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a coated, perforated metal center tube—all encased in an outer sock material. All are 6” OD (152 mm) by 31∕2" ID (89 mm) and available in standard interchangeable nominal lengths from 111∕4" (290 mm) to 571∕4" (1450 mm).

The CAA Series 5 coalescer cartridges are available in two cartridge mounting styles: self-centering rod
mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance—uniform threads, no shrinkage, no galling and no gasket to recover.

A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.

STANDARD DESIGN FEATURES:
• Tested and qualified to the Fifth Edition of EI 1581, Category C
• Multi-layered media for increased solids holding capacity
• Ultra-fine solids removal
• Maximum water coalescence
• Balanced cartridge flow characteristics
• Recommended maximum operating temperature: 240°F (115oC)
• Withstands in excess of 75 psi differential pressure
• pH range from 5 to 9
• Screw base or open-end configuration

MATERIALS:
• All metal components are treated against corrosion
• Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
• Buna-N gaskets—other materials are available on request

If you need, please feel free to contact:Miss. Livia
E-mail: />Whatsapp / / />Tel: 86 , Xinxiang Lifeierte Filter Corp., LTD
Web in English: / Web in Thai: th.le-filter.com
Add: No. 9 Hongli Road, Muye District, Xinxiang City, Henan Province, China.

Другие товары поставщика

	Cartridge Filter Dust Collector for Chemical Industry Fume Extraction	Features: 1, high dust removal efficiency. Can filter fine dust, general filter cartridge filter accuracy of 5 ~ 7 microns, filtration efficiency ...
	waste tyre pyrolysis plant with the best price	Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil...
	PECO facet Coalescing filter element CAA38-5SB	INTRODUCTION: Facet CAA Series 5 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges...
	Cartridge dust collector for metallurgy	Features: 1, high dust removal efficiency. Can filter fine dust, general filter cartridge filter accuracy of 5 ~ 7 microns, filtration efficiency ...
	LEFILTER Waste Tyre Pyrolysis Plant	Working principle:First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor wil...

Похожие товары

	6 Axis MIG Welding Robot For Carbon Steel	Продавец: Beijing Kaberry International Trade Co.,Ltd	6 axis MIG welding robot for carbon steelThis model has high quality and good price. We focus on ...
	Сварочный робот 1800 Mm Arm Length Mig Welding Robot	Продавец: Beijing Kaberry International Trade Co.,Ltd	1800mm arm length MIG welding robot We supply 1800mm arm length MIG welding robot. The robot is o...
	Сварочный робот 1650 Mm Arm Length Mig Welding Robot	Продавец: Beijing Kaberry International Trade Co.,Ltd	1650mm arm length MIG welding robotWe supply 1650mm arm length MIG welding robot. This model is t...
	Промышленные роботы для сварки 1440 Mm Arm Length Mig Welding Robot	Продавец: Beijing Kaberry International Trade Co.,Ltd	1440mm arm length MIG welding robot This model is our popular model. it is widely used in China. ...
	Сварочные роботы 6 Axis MIG Welding Robot For Stainless Steel	Продавец: Beijing Kaberry International Trade Co.,Ltd	6 axis MIG welding robot for stainless steel We produce welding robot from 2015,Website:, now we ...