Pharmaceutical stability chamber supplier
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
Pharmaceutical Stability Testing Laboratory is designed for conducting accelerated humidity and heat testing, long-term stability testing, and constant humidity and heat testing on pharmaceutical intermediates, active pharmaceutical ingredients, finished pharmaceutical products, and medical devices. It also supports cultivation of plant and animal samples and bacterial cultures, as well as low-temperature storage, enabling analysis and evaluation of product behavior. This facility serves dedicated research in pharmaceuticals, medicine, biotechnology, food processing, electronics, and all life science-related industries.
Standards
WHO Principles Require:
Long-term stability testing conditions at 25°C/60% RH humidity.
The 40°C/75% RH humidity standard for 6-month accelerated testing is primarily applied in the pharmaceutical industry's stability testing systems, simulating environmental climate conditions including temperature, humidity, and light exposure.
Features
1.Modular Structural Integrity: The lab utilizes a unitized assembly design, allowing you to expand the internal volume or relocate the facility with minimal effort as your production scales.
2.Advanced Airflow Design: By employing a side-top air supply and side-bottom return principle, the system eliminates dead zones, ensuring that even a fully loaded room maintains exceptional temperature and humidity uniformity.
3.Precise Control Algorithms: You benefit from a micro-integral PID control system that coordinates cooling, heating, and humidification to prevent parameter overshoot and ensure rapid recovery after door openings.
4.Regulatory-Grade Monitoring: The high-sensitivity PT100 sensors and dual-mode (program/constant) operation allow you to meet the most stringent ICH stability protocols without manual intervention.
5. Safety Suite: The system includes multi-level protection against over-temperature, low water levels, compressor over-pressure, and phase-sequence anomalies, ensuring 24/7 unmanned operation safety.
Parameters
| Item | Specification |
|---|---|
| Test Area Dimension | Specific dimensions to be designated by the customer based on usage conditions! |
| External Dimension | Subject to the quotation plan |
| Operating Temperature Range | SBY: 0°C ~ +60°C |
| Relative Humidity Range | 30% ~ 95% RH |
| Temperature Deviation | ≤±2°C (≤1°C for incubation chambers) |
| Humidity Deviation | ±5% RH |
| Temperature Fluctuation | ≤±0.5°C |
| Heating Time | ≤30 min |
| Cooling Time | 30 min ~ 180 min (varies by model) |
| Material | Exterior: A3 color steel plate + spray coating; Interior: SUS#304 stainless steel; Insulation layer: PU foam |
| Temperature & Humidity Control System | Imported fully-hermetic or semi-hermetic compressor from Europe, America, Japan, or Korea; Refrigerant: R134a; Axial flow fan with side/top air outlet; High-performance heater; Steam humidification; ADP critical point condensation dehumidification; Air-cooled or water-cooled options |
| Controller | Adopt Yonghe's own brand or Korean TH500/TH300 touch screen controller; Display precision: Temperature 0.1°C, Humidity 0.1% RH; Operation modes: Program mode, fixed value mode; Control method: Microcomputer PID with integral operation; Input signal: PT100 platinum resistance |
| Observation Window | Multi-layer hollow anti-fog explosion-proof glass |
| Safety Devices | Over-temperature protection, leakage protection, water shortage protection, humidification system protection, compressor over-pressure/overload/over-current protection, fan overload protection, phase sequence protection |
| Power Supply | AC380V (1±10%) V, 50±0.5 Hz, 3-phase 4-wire + protective earth |
| Optional Accessories | Temperature & humidity recorder (capable of simultaneous recording of temperature/humidity signals and multiple test points), large observation window, test hole, SMS alarm, high/low temperature deviation alarm, dual-compressor system, etc. |
| Extendable Products | Constant temperature incubation chamber, constant temperature & humidity test chamber, high-low temperature test chamber, constant temperature room, aging test chamber, burnout test chamber, etc. |
| Special Notes | Customizable dimensions available to meet customer requirements |
Test Procedures
1.Startup and Monitoring:
Start the test chamber and monitor parameters such as temperature and humidity in real time to ensure they remain stable within the set range.
Record data regularly, such as sampling and testing at the end of the 1st, 2nd, 3rd, and 6th months for long-term tests.
2.Abnormal Condition Handling:
If parameters deviate from set values, immediately stop the test, inspect the equipment, and take corrective actions.
3.Recording Requirements:
Document test conditions, timestamps, and results in detail to ensure data integrity and accuracy.
4.Data Analysis:
Evaluate drug stability under varying conditions and assess degradation trends.
Prepare reports including test conditions, data, conclusions, and recommendations.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Carton drop tester for ASTM D5276 packaging impact testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Carton Drop Tester meets the following international and natio... |
 |
Bus seat tester for safety and durability testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Test Standards NHTSA S5.1.3 – Seat Structural Strength Testing NHTSA S5.... |
 |
Safety Helmet Roll-off Testing Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com The safety helmet retention test equipment is a device used to evaluate the stability of a ... |
 |
Computerized Benchtop Tribology Testing System ASTM G99 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Benchtop Multi-Function Friction and Wear Tester is a compact yet highly prec... |
 |
High Precision Automotive Electrical Wire Abrasive Belt Grinding Machine OEM Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1)Stable Mechanical Structure– Compact design ensures safe a... |
Похожие товары
 |
Two-Shot Injection Molds | Продавец: WIT MOLD LIMITED | Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject... |
 |
precision injection molding | Продавец: WIT MOLD LIMITED | precision injection molding Precision injection moldingis a method demanding unparalleled accura... |
 |
Custom Plastic Molds molding | Продавец: WIT MOLD LIMITED | Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part... |
 |
Thermoset Molding | Продавец: WIT MOLD LIMITED | Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc... |
 |
PE Film Scrap, Rolls, Bale, Regrinds, Lump, LLDPE, HDPE, LDPE | Продавец: Ivory Oforma Plastic Scrap Sdn. Bhd. | Мы предлагаем в наличии отходы полиэтиленовой пленки, включая LLDPE, HDPE и LDPE, для постоянных ... |
