PV module durability test under ammonia environment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
The Photovoltaic Ammonia Test Chamber is a testing device designed to evaluate the corrosion resistance of photovoltaic modules in ammonia environments, ensuring their long-term stable operation in harsh conditions such as industrial or agricultural settings.
Standards
IEC 62716: Photovoltaic (PV) modules—Ammonia corrosion testing (The core standard for this equipment).
IEC 61701: Salt mist corrosion testing of photovoltaic (PV) modules.
IEC 60068-2-52: Environmental testing—Part 2-52: Tests—Test Kb: Salt mist, cyclic (sodium chloride solution).
GB/T 2423.17 / GB/T 2423.18: Environmental testing for electric and electronic products—Salt mist testing methods.
IEC Draft 82/722/CDV: Specific requirements for integrated salt mist and ammonia gas exposure sequences.
Features
This equipment can independently perform all test procedures required by IEC 61701 and IEC Draft Standard 82/722/CDV. Specifically, spray testing at severity levels 1-6. damp heat storage, standard atmospheric environment testing, and sample cleaning phases are all completed within the NaCl corrosion chamber. Ammonia spray testing, damp heat storage, spray washing, and drying can all be performed within the NH3 corrosion chamber.
Parameters
| Item | Specifications |
|---|---|
| NH₃ Concentration | 0–10000 ppm (adjustable) |
| Ammonia Concentration Resolution | ±1 ppm |
| Temperature Control Range | 15°C ~ 70°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Temperature Deviation | ≤ ±1.0°C |
| Temperature Uniformity | ≤ ±2°C |
| Humidity Control Range | 40% ~ 100% RH (adjustable) |
| Humidity Deviation | ≤ ±2% RH |
| Humidity Uniformity | ≤ ±3% RH |
| Test Accuracy | ±2% |
Test Procedures
1.Preparation
Sample Preparation: Clean samples and secure them on the sample rack, ensuring they do not touch each other.
Solution Preparation: Prepare a 5% NaCl solution (pH 6.5-7.2) according to the standard.
2.Power-On Test
Power Connection: Connect the power supply and turn on the main switch.
3. Test Operation
Start Test: After confirming parameters are correct, press the “Start” button.
Spray Inspection: Once temperature is reached, the spray system will automatically activate. Observe spray uniformity.
4. Test Completion
Shutdown Procedure: Turn off the spray switch. Allow cooling to below 40°C before disconnecting power.
Sample Removal: Remove specimens for corrosion assessment.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
SI80 Carbon Arc Aging Tester丨SI80 Carbon Arc Aging Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Material aging and fading performance test SI80 carbon arc aging tester, carbon arc aging ... |
 |
Flexometer / Bally type flexometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Bally flex tester is designed to evaluate the flexural resistance of leather to continual f... |
 |
Industrial automotive screw inspection machine supplier | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system aligns with or supports adherence to relevant international and indus... |
 |
Shoelace eye wear testing machine丨Shoelace eye wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main uses: The shoelace eye wear testing machine is mainly used to test the wear resistanc... |
 |
Button Impact Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards: ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (reference... |
Похожие товары
 |
Two-Shot Injection Molds | Продавец: WIT MOLD LIMITED | Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject... |
 |
precision injection molding | Продавец: WIT MOLD LIMITED | precision injection molding Precision injection moldingis a method demanding unparalleled accura... |
 |
Custom Plastic Molds molding | Продавец: WIT MOLD LIMITED | Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part... |
 |
Thermoset Molding | Продавец: WIT MOLD LIMITED | Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc... |
 |
PE Film Scrap, Rolls, Bale, Regrinds, Lump, LLDPE, HDPE, LDPE | Продавец: Ivory Oforma Plastic Scrap Sdn. Bhd. | Мы предлагаем в наличии отходы полиэтиленовой пленки, включая LLDPE, HDPE и LDPE, для постоянных ... |
