D36 Series MOV Block for Distribution Arrester
D36 Series MOV Block for Distribution Arrester
D36 Series MOV for Distribution Arrester is an advanced surge protection device designed to protect electrical systems and equipment from damaging transient voltages. It is designed with a superior metal oxide varistor technology that responds quickly and accurately to both low and high frequency transients, providing an extremely efficient form of surge protection. In addition, the series features a special design that allows for easy installation and maintenance. With its superior engineering design and superior performance, the D36 Series MOV for Distribution Arresteris the excellent choice for protecting your electrical system from surges and transients.
The nouns, parameters and corresponding test methods in this parameter list conform to the standards of IEC60099-4:2014 and GB11032-2020.
The rated voltage, power frequency reference current and power frequency reference voltage are reference values.
The 2ms square wave tolerance value is based on the declared current/2ms repetitive charge transfer charge Qrs=423, if the actual test waveform 2ms current/2mS repetitive charge transfer charge Qrs is not equal to 423, it should be corrected according to the actual 2ms current waveform and Qrs value.
The charging rate of the aging test was 90%.
The number of pulses for the high current withstand value is two.
The nouns, parameters and corresponding test methods in this parameter list conform to the standards of IEC60099-4:2014 and GB11032-2020.
The rated voltage, power frequency reference current and power frequency reference voltage are reference values.
The 2ms square wave tolerance value is based on the declared current/2ms repetitive charge transfer charge Qrs=423, if the actual test waveform 2ms current/2mS repetitive charge transfer charge Qrs is not equal to 423, it should be corrected according to the actual 2ms current waveform and Qrs value.
The charging rate of the aging test was 90%.
The number of pulses for the high current withstand value is two.
Benefits of D36 Series MOV for Distribution Arrester
D36 Series MOV for Distribution Arrester provides a number of benefits. It provides superior protection against transient over-voltages, has a wide operating temperature range, and is extremely durable. It also has low power consumption, is reliable and cost-effective, and is easy to install and maintain. It also offers high surge current capability with a low voltage drop, and is designed to meet the latest industry standards for surge protection. In addition, it offers a long service life and has a high surge current capacity.As a renownedmetal oxide varistor manufacturer, TGE is committed to delivering high-quality products like the D36 Series MOV for Distribution Arrester. Utilizing thezinc oxide varistor function, ourMOV discandZOV MOVtechnologies provide exceptional surge protection, ensuring the longevity and reliability of your electrical systems.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MOV Block for Distribution Arrester | TGE developed D36 & D42 series glass coating MOV which be suitable for distribution arresters according to IEC60099-4 (2014) in 2018. Based on ... |
 |
High Gradient MOV Block for GIS Arresters | High Gradient MOV (Metal Oxide Varistor) GIS Arresters are surge arresters designed specifically to protect sensitive GIS (Gas Insulated Switchgear... |
 |
D99 Series MOV Block for Substation Arrester | The D99 Series MOV for Substation Arrester is a state-of-the-art lightning arrester designed to protect substations from lightning and overvoltage ... |
 |
D78H35.4 MOV Block for DC Arresters | Note: The nouns, parameters and corresponding test methods in this parameter list conform to the standards of IEC60099-4:2014 and GB11032-2020. T... |
 |
Varistors for Surge Protective Devices | Varistors, also known as voltage-dependent resistors, are used as part of surge protective devices (SPDs). Varistors are designed to provide protec... |
