Metal Side Trimming Machine

The longitudinal shear of cold rolled strip steel mainly has the side trimmerand metal slitter. To longitudinal shears, BOYA company mainly produces the side trimmer which widely used in all kinds of process lines to cut the edge of strip, eliminate edge defects and makes the side of the strip neat, complete and smooth. BOYA side trimmer has single turret type and double turrets type, the side trimmer will equipped with deburring device and scrap dispose device. The double turrets side trimmer and scrap chopper can realize online blade change, automatically adjust the overlap and width, BOYA trimmers are high accuracy, greatly improve the production efficiency and product quality for customers.

The Introduction of Longitudinal Disc Shear Machine

Disc type longitudinal metal slitting machine, usually designed with a rotating disc blade to continuous, longitudinal shear the moving strip, also can trimming the strip into a narrow width or relatively width, or cut the strip edges evenly. When it is used to cut edges, it is usually equipped with a scrap chopper which can cut the scrap edge into small pieces and is easy to recut, which cuts edges into small pieces for easy recycling.

The cut to length disc shear can be classified into two forms according to its use: plate edge disc shear and steel strip disc shear. In the former, each circle blade is cantilever fixed on a separate drive shaft, and the number of blades is two pairs, which are used in the finishing line of medium thick plate, the crosscutting unit of plate and the continuous pickling operation line. The latter blade is generally fixed in two common drive shafts (there are also a few disk blades fixed in a separate drive shaft), the number of blades is multiple pairs, used for the splay unit, continuous annealing and galvanizing and other operations line.

Types of Metal Side Trimming Machine

Side Trimmer for Pickling Line

Rotary Shear for Annealing and Galvanizing Line

Side Trimmer for Rewinding Line

Coil Cutting Machine for Tinning Line

Non-ferrous Side Trimmer for Hot Rolling Mill

Non-ferrous Side Trimmer for Cold Rolling Mill

Classification of aluminium slitting machine

01

According to application

Edge cutting disk shears for cutting strip side. Edge-cutting disc shears can be used in cold rolled strip steel cut to length line and slitting units.

Used for longitudinal continuous shear of wide strip steel, according to the workload needs to determine its structure is two pairs of cutter head or multiple pairs of cutter head disk shear.

02

According to the driving mode of the cutter head, the disk shear can be divided into power shear and tension shear. Tension shear refers to the knife plate is not directly driven, after the shear tension roller or reel drag strip steel, in the disc shear shear shear. These two kinds of shear modes have their own characteristics, so there is a clutch in the transmission system of the disc shear, which can be used according to the need for dynamic shear or tensile shear mode.

Shear Quality Analysis

Shear deformation contains the elasticity of the steel sheet, plastic variable, crack extension, material break, etc. In the elastic deformation stage, the blade is pressed against the steel plate, making the steel plate deform and bend; then, as the population distance is constantly close, the steel sheet reaches the yield limit, the plasticity in the metal becomes broken; shear continues, in the blade Produce force concentration, and induce minute crack production, the upper and lower cracks are rapidly expanded, coincident, the steel plate is disconnected, the shear process is completed.

The lateral gap of the shear edge is the most important factor affecting the quality of the steel plate. From the shear surface of the steel sheet, with the increase of the side gap, the cut layer ratio will be significantly reduced, and the burrs are substantially changed. When the side gap reaches a certain degree, the cutting layer reduction is no longer obvious, and the burrs will significantly increase. Setting a reasonable side gap value is the key to ensuring the quality of the shear.

As one of the most professional metal slitting machine manufacturers, we provide metal slitter for sale, tension leveller, sheet metal slitter, sheet metal slitter for sale, sheet metal slitting machineand etc. Want to know more, contact us.

Другие товары поставщика

	Rotary Shear for Annealing and Galvanizing Line	In order to ensure that the tearing surface of the strip is smooth, it is necessary to ensure that the upper and lower knife planes are relatively ...
	Constant Velocity Joint	Constant Velocity Jointis the advantage product of BOYA, which is very welcomed by design institutes. Because of the characteristics of high accura...
	Non-standard Bearing	Non-standard bearingare bearings that do not conform to the outline dimensions stipulated by the national standards, that is, the outline dimension...
	CV Joint Bearing For Steel and Non-ferrous Metal Industries	The main CV joint bearing is ball cage type, designed and developed BJ, BHJ, BJS, BC, DOJ five categories, compared to NTN, the model specification...
	Coil Coaters	The color coater provided by BOYA adopts modular design and is highly intelligent. The coil coating equipment is easy to operate and has high accur...

Все товары поставщика

Похожие товары

	Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induced draft fan	Продавец: Popula Group Company Limited	Puduct Name: Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induce...
	Ultrasonic Computerized Tape Cutting Machine (Right Angle) JM-2100	Продавец: Zhejiang Huaqi Information Technology Co., LTD	Fully automatic cutting, easy operation. Wide application range, high cutting quality, smooth cut...
	24 Cavity Cap Compression Machine	Продавец: Zhejiang Huaqi Information Technology Co., LTD	The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
	24 Cavity Cap Compression Machine	Продавец: Zhejiang Huaqi Information Technology Co., LTD	The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
	SWT-UME Hot Air Welder Pvc Tarpaulin	Продавец: HEBEI MINGMAI TECHNOLOGY CO.,LTD	SWT-UME Banner Hot Air WelderVoltage: 220V/110VPower: 3000W/2200WFrequency: 50/60HzTemperature: 2...