Tube Brush

Types of Small Tube Cleaning Brushes

Tube brush is a very efficient, convenient and cost-effective tool, which is widely used in food, manufacturing and other industries. Small pipe brushcan be easily installed on pneumatic tools, machine tools, bench drills, or can be used directly by hand.

According to the different material, the range of external tube brushuse is also different. The common use of tube brush is cleaning, polishing and grinding. Besides, tube brush is also frequently used for hydraulic cutting groove edge deburring, cross hole deburring, air conditioning refrigerator deburring, cylinder block deburring, engine parts, mechanical processing, hole processing. Meanwhile, tube brush is also suitable for polishing some cone and cone shapes. Because the price of plumbing pipe brushis low and the effect is good, tube brush is widely favoured by processing enterprises.

Nylon Tube Brush

Widely used in the food industry, it can easily clean bottles, test tubes, or other parts that are not easy to contact, and effectively remove dust and oil stains.

Specifications of Tube Brush

Longguang Accepts other kinds of size customization

Specifications of Tube Brush

Longguang Accepts other kinds of size customization

Diameter	Brush Length	Total Length
6	40	120
8	40	120
10	60	120
14	60	150
16	60	150
20	60	150
25	70	150
30	70	150

Quality requirements of industrial tube brush

Tube brush needs to have a good rebound performance.

The brown bristles of the brush need to receive 150-450 strokes per minute at speeds above 1200 r/min, and need to return to their original upright state in less than 0.05 seconds to facilitate preparation for the next cleaning cycle.

Tube brushes should have high strength

The brown bristles of the brush need to accept 150-450 times per minute of high speed and high strength of the needle teeth of the celine. If the bristles are not strong enough, the bristles will soon be damaged and shortened. The brushes will be used for a short period of time and the quality of the brushes will not be very good.

Tube brush needs to have a high speed

In order to ensure the effect of the brush on the number of needle teeth of the tin, the brush is required to have a high speed, the current brush running speed is basically above 1200r/min. This puts a high demand on the dynamic balance, static balance and firmness of the brush. This way the brushes will be more durable and greatly enhance the use time of the brushes.

Characteristics of Tube Brush

Pipe fitting brush, wire fitting brushhas the characteristics of economy, safety, convenience and efficiency. It can solve the inner wall polishing, cleaning and other problems with the minimum cost. For metal-process industry, we can design the grip shank specially for the pipe brush, so that it can be easily installed on CNC, bench drill and other equipment, and has good concentricity, and dose not beat when rotaing at high speed. Pipe brush can ensure that the processed products have consistent quality, and do not damage the workpiece. In the food and medical industry, we provide food grade pipe brush to ensure the maximum safety of food and medicine.

Advantages of Tube Brush

We have fully automated production equipment, so we can ensure that we have the ability to provide the high quality wire pipe brush to customers in time when we receive the large order. Our precision control is very high, which can meet the customer for the tolerance requirements.

What are tube brushes used for?

Tube deburring brushas an emerging brush products, its application range is very wide, commonly used in hydraulic felling hole groove edge deburring, cross hole deburring, air conditioning refrigerator (compressor) deburring, cylinder deburring, engine parts, machining, hole processing, brake Ceres processing; also suitable for some vertebral round, cone, venturi type hole polishing. The spherical brush can be used for the best surface treatment of cylinders, valves, cavities and pipes of various shapes and sizes in a quick and easy way. Polishing brush can automatically centering, automatic calibration of the hole surface for fine and consistent processing, does not affect the original accuracy and scale of the workpiece, easy to use, safe, economical, significant results.

Другие товары поставщика

	Honing Brush	Types of Honing Brushes As the hone tool, honing brush is a very advanced industrial brush, which is suitable for most kinds of internal polishing....
	Steel Wire Disc Brush	The steel wire disc brush has strong grinding ability and is mostly used for the workpiece with low surface roughness requirements. Nylon sanding b...
	Nylon Strip Brush	Nylon brush stripsare most common to see on the sides of escalators. Running elevator steps and side walls have a direct gap. The nylon brush strip...
	Strip Brush	Types of Strip Brushes Strip brush is a kind of brush that is widely used in industrial and civil fields. According to the different materials, st...
	Angle Grinder	Under many circumstance, due to the limitation of equipment, it is necessary to use manual equipment to grind the parts such as angle grinder. At t...

Все товары поставщика

Похожие товары

	PEEK Non-standard Parts	Продавец: SHEN ZHEN HUIHUAN TECHNOLOGY CO,.LTD	PEEK Non-standard Parts PEEK material is a new type of semi-crystalline aromatic plastic engineer...
	Non-standard Parts	Продавец: SHEN ZHEN HUIHUAN TECHNOLOGY CO,.LTD	Non-standard Parts Standard parts are parts produced in accordance with national standards (GB), ...
	Metal Stamping Parts	Продавец: SHEN ZHEN HUIHUAN TECHNOLOGY CO,.LTD	Metal Stamping Components Most of the world's steel is made into finished products by stamping. ...
	Metal CNC Machining Parts	Продавец: SHEN ZHEN HUIHUAN TECHNOLOGY CO,.LTD	Metal CNC Machining Parts Custom cnc metal parts are suitable for hand board production and small...
	Punches and Bushings Parts	Продавец: SHEN ZHEN HUIHUAN TECHNOLOGY CO,.LTD	Punches and Bushings Parts When punching holes with a concave die, the standard of hole diameter ...