HSG Engineering Hydraulic Cylinders

Brief Introduction:

HSG type engineering hydraulic cylinder is a double-acting single-rod piston type hydraulic cylinder. It has the characteristics of simple structure, reliable operation, convenient assembly and disassembly, easy maintenance, buffering device and various connection methods. Mainly used in construction machinery, transportation, ships, lifting machinery, mining, machinery.

Product Advantage:

The HSG series engineering hydraulic cylinder is a double-acting single-piston rod hydraulic cylinder; the mounting method is mostly ear-ring type. There are three types of external connection: internal key connection and flange connection according to the connection method of the cylinder head and the cylinder. Engineering hydraulic cylinders are mainly used in hydraulic systems such as construction machinery, heavy machinery, lifting machinery and mining machinery.

HSG Engineering Hydraulic Cylinders

Product Description

Front and Rear Earrings Installation Features:

The tail single earring is suitable for the single earring installation condition required for the path condition or structural design of the piston rod to be along the path of the same motion plane when the piston rod is moving along the same motion plane; It is possible to install the tail and rod end spherical bearings at this time, but pay attention to the pressure load that the spherical bearing is allowed to bear.

HSG double-acting single-rod piston type hydraulic cylinder is mainly composed of a cylinder tube, a piston, a piston rod, a cylinder head, a cylinder bottom, a piston rod head and related auxiliary devices. The piston divides the cylinder into two left and right chambers. By means of the action of the pressure oil, the cylinder reciprocates. In order to improve its working effect, a sealing ring is arranged on the piston to eliminate internal leakage. Where the piston rod passes through the cylinder head, due to the existence of the gap, the external leakage phenomenon is easy to occur, and the dust can enter the cylinder through the gap, so the sealing device and the dustproof factor are set. At the same time, in order to eliminate the influence of the eccentric load on the piston operation All hydraulic cylinders must be placed at the protruding end of the piston rod, and a guiding sleeve of a considerable length is provided. In addition, when the piston moves at a faster speed, the mechanical collision between the piston and the cylinder bottom and the cylinder head is serious, so the hydraulic cylinder at both ends, a buffer reduction gear should be provided.

Model Coding:

　① Unit code

　　②Connecting type L: Screw K: Clasp F: Flange

　　③ Bore/Rod (mm)

　　④ Pressure E: 16MPa F: 20MPa G: 25MPa

　　⑤ Mounting

　　⑥ Connecting in rod

　　⑦ Oil port 1: Screw 2: Flange

　　⑧ Stroke (mm)

　　⑨ Mounting distance

Technical Specification:

Specifications: Mark* is for speed ratio 1.64 only.

Bore D	Φ			d			d1	R	b	L6	M2	L10	L5	L7	L2	2-M1	H1	Φ1
	pressure			speed ratio
	16	20	25			2(1.64)
32	42	48		16	18	*20	16/GE6ES	20	18	20		40	40	50	245		15	50
40	50		56	20	22	25	20/GE20ES	25		30		50	30	65	255			65
50	65		68	25	28	32	30/GE30ES	35		40		60	40		280			75
63	78	80	83	32	35	45						65			295			79
80	95		102	40	45	55	40/GE40ES	45		50		80	50	70	347		18	110
90	108		114	45	50	63					M36X2	90		66	357
100	118		127	50	55	70	50/GE50ES	60		65	M42X2	110	60	72	402	M27X2	20
110	130	133	140	55	63	80					M48X2	115		77	422
125	145		152	63	70	90					M52X2	140		78	452
140	164		168	70	80	100	60/GE60ES	70		75	M60X2	155	70	85	498
150	180			75	85	105					M64X2	160	75	92	513	M33X2	22
160	194			80	90	110					M68X2	170	80	100	533
180	219			90	100	125	70/GE70ES	80		85	M76X2	190	89	107	588	M42X2	24
200	245			100	110	140	80/GE80ES	95	90	95	M85X2	210	100	110	628
220	273			110	125	160	90/GE90ES	105	100	105	M95X2	220	110	120	658		25
250	299			125	140	180	100/GE100ES	120	110	120	M105X2	255	122	135	688

Bore D	rod			pressure 16Mpa
	speed ratio			Pushing force(KN)	pull force(KN)
			2(1.64)		speed ratio=1.33	speed ratio=1.46	speed ratio=2(1.64)
32	16	18	*20		9		*7.8
40	20	22	25			14
50	25	28	32
63	32	35	45
80	40	45	55		55	55
90	45	50	63
100	50	55	70
110	55	63	80
125	63	70	90
140	70	80	100
150	75	85	105
160	80	90	110
180	90	100	124
200	100	110	140
220	110	125	160
250	125	140	180

Mounting
Code	Mounting	Notice
1	single articulated clevis( with bush)
2	single articulated clevis( with oscillating bearing）
3	middle trunnion	Bore ≥80
4	front flange	Bore ≥80
5	middle flange	Bore ≥80

Piston rod connecting
Code	Mounting	Notice
1	outside screw
2	outside screw and articulated clevis( with bush)
3	outside screw and articulated clevis( with oscillating bearing）
4	one piece single articulated clevis( with bush)
5	one piece single articulated clevis( with oscillating bearing）

Specifications:

Mark* is for speed ratio 1.64 only.

Bore D	Φ			d			d1	R	b	L6	M2	L10	L5	L7	L2	2-M1	H1	Φ1
	pressure			speed ratio
	16	20	25			2(1.64)
32	42	48		16	18	*20	16/GE6ES	20	18	20		40	40	50	245		15	50
40	50		56	20	22	25	20/GE20ES	25		30		50	30	65	255			65
50	65		68	25	28	32	30/GE30ES	35		40		60	40		280			75
63	78	80	83	32	35	45						65			295			79
80	95		102	40	45	55	40/GE40ES	45		50		80	50	70	347		18	110
90	108		114	45	50	63					M36X2	90		66	357
100	118		127	50	55	70	50/GE50ES	60		65	M42X2	110	60	72	402	M27X2	20
110	130	133	140	55	63	80					M48X2	115		77	422
125	145		152	63	70	90					M52X2	140		78	452
140	164		168	70	80	100	60/GE60ES	70		75	M60X2	155	70	85	498
150	180			75	85	105					M64X2	160	75	92	513	M33X2	22
160	194			80	90	110					M68X2	170	80	100	533
180	219			90	100	125	70/GE70ES	80		85	M76X2	190	89	107	588	M42X2	24
200	245			100	110	140	80/GE80ES	95	90	95	M85X2	210	100	110	628
220	273			110	125	160	90/GE90ES	105	100	105	M95X2	220	110	120	658		25
250	299			125	140	180	100/GE100ES	120	110	120	M105X2	255	122	135	688

Bore D	rod			pressure 16Mpa
	speed ratio			Pushing force(KN)	pull force(KN)
			2(1.64)		speed ratio=1.33	speed ratio=1.46	speed ratio=2(1.64)
32	16	18	*20		9		*7.8
40	20	22	25			14
50	25	28	32
63	32	35	45
80	40	45	55		55	55
90	45	50	63
100	50	55	70
110	55	63	80
125	63	70	90
140	70	80	100
150	75	85	105
160	80	90	110
180	90	100	124
200	100	110	140
220	110	125	160
250	125	140	180

Mounting
Code	Mounting	Notice
1	single articulated clevis( with bush)
2	single articulated clevis( with oscillating bearing）
3	middle trunnion	Bore ≥80
4	front flange	Bore ≥80
5	middle flange	Bore ≥80

Piston rod connecting
Code	Mounting	Notice
1	outside screw
2	outside screw and articulated clevis( with bush)
3	outside screw and articulated clevis( with oscillating bearing）
4	one piece single articulated clevis( with bush)
5	one piece single articulated clevis( with oscillating bearing）

JC forging is aprofessional large hydraulic cylinder manufacturersand heavy duty hydraulic cylinder manufacturers. We provide Hydraulic Cylinder Forgings, Hydraulic Cylinder, double acting telescopic hydraulic cylinders for sale, engine lift hydraulic cylinder, biggest hydraulic cylinder, large hydraulic cylinders for sale, custom forged partsand so on. Want to know about double acting hydraulic cylinder typesand double acting hydraulic cylinder price? Please contact us.

Другие товары поставщика

	Forklift Series Cylinders	Forklift Series Cylinders What is Forklift Series Cylinder？ The forklift hydraulic lift cylinder include tilt cylinders, lift cylinders, steering c...
	BM6 High Pressure Motor	Brief Introduction: BM6 hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, lon...
	BM1 Small Hydraulic Motor	We have small hydraulic motors for sale! Brief Introduction: The BM1 is a small, spool valve type small hydraulic wheel motor. Its characterist...
	Hydraulic Motor	The hydraulic motor is an actuator of the hydraulic system that converts the liquid pressure energy which provided by the hydraulic pump into the m...
	BM6 High Pressure Motor	What is BM6 High Pressure Motor? BM6 high pressure hydraulic motoris a face-end flow, pressure-compensated motor, mainly composed of output shaft,...

Все товары поставщика

Похожие товары

	API 608 Шаровой кран	Продавец: Китайский производитель клапанов Vervo Co., Ltd	Discover top-quality ASTM A105N carbon steel ball valves fabricated according to API 608 standard...
	Шаровые краны из углеродистой стали	Продавец: Китайский производитель клапанов Vervo Co., Ltd	Discover our high-quality Carbon Steel Ball Valve, perfect for your industrial needs. Available i...
	Циндаоцзи хо машина Ко., Лтд.	Продавец: Циндаоцзи хо машина Ко., Лтд.	Циндао Jiho Machine Co., Ltd. со штаб-квартирой в Циндао, Китай. Как высокотехнологичное производ...
	Electric Pruning Shears	Продавец: Zhejiang GuYueHu Industry&Trade Co.,Ltd.	Electric pruning shears, also called electric cutting shears or electric garden shears use rechar...
	Solar Cells	Продавец: Sunrise Energy Co., Ltd	Solar Cells The solar cell qualitycan directly convert light energy into electrical energy throu...