Gardener Denver Style Valve&Seat
Triplex Mud Pump Parts
Fluid End ExpendablesMud Pump PistonsHNA offers a full line of pistons for duplex and triplex mud pumps. All API types are available. Among these are:
• Pistons with replacement rubbers
Our premium pistons are fully interchangeable with other API standard designed pistons and deliver maximum performance in almost all drilling conditions. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other API designed pistons make our premium piston a sound value.• Bonded Rubber Pistons
This one piece bonded constructed piston has no joints to leak. Eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes. This Fail-Safe piston seals off to greater diameter as liner wears
• Premium Bonded Urethane Pistons Currently running in pumps using exotic muds and highest drilling pressures! Bonded construction - no joints, no leakage. Longer piston and liner life. This piston will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This Premium Piston has been in service for years, providing unmatched performance under extreme drilling conditions. This one piece bonded unit provides the same series of advantages., being imprevious to oil and other chemicals
Size of Piston & Parts
3” 3-1/2” 4” 4-1/2” 5” 5-1/2” 6” 6-1/4” 6-1/2” 6-3/4” 7” 7-1/4”
Duplex K K K K B B B L L L L L
Triplex K K K K B B B L L L L L
Qingdao HNA Oilfield Machinery Co.,Ltd. Lancun Industrial Zone,Qingdao,China 266100
Phone: +86
E-mail:
Triplex Mud Pump Parts
Fluid End Expendables
Pistons with replacement rubbersHNA also offers a full line of piston replacements including Piston Hubs, Plates, Snap rings and Replacement Rubbers.
The hub is formed from high grade steel.
The piston rubber is made from specially formulated compounds which are resistant to the effects of heat, oil and water. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals.Replacement rubbers Duplex piston hub
Triplex piston parts Triplex piston hubs
Pistons
Qingdao HNA Oilfield Machinery Co.,Ltd. Lancun Industrial Zone,Qingdao,China 266100
Phone: +86
E-mail:
Triplex Mud Pump Parts
Fluid End Expendables
Valves & Seats, Inserts and Springs
HNA offers 5 different styles of valves & seats to fit your drilling needs, suiting to almost all popular mud pumps in the world.
The Stem Guided valve and seat and the Wing Guided valve and full open seat offers many advantages for today's higher pressures and faster drilling operations.
Stem-guided valve &Tri-arm seat features greater fluid flow than four-arm seats, as well as it features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non-breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positive sealing.
The strong, thick, valve knock off nut holds the insert tightly reducing flex and breathing which lessens the chance of foreign matter getting between valve and insert.
Stem-guided valve & Cross-arm seat features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non-breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positive sealing.
The strong, thick, valve knock off nut holds the insert tightly reducing flex and breathing which lessens the chance of foreign matter getting between valve and insert.
Tri-wing guided valve & Full open seat
Three-wing guided valves and full open seats features greater fluid flow than four-wing valves, the unibody forged valve features greater strength than traditional welded-wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation.
Qingdao HNA Oilfield Machinery Co.,Ltd. Lancun Industrial Zone,Qingdao,China 266100
Phone: +86
Triplex Mud Pump Parts
Fluid End Expendables
HNA makes two styles of Four-wing guided valves and full open seats which feature greater fluid flow through the full open seat. The full open seat provides easier valve maintenance and seat pulling, in valve-over- valve fluid ends.
Innovative unibody Four-wing guided valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation. This combination will handle lost circulation material better than most conventional style valves and seats while the seating angle greatly improves flow characteristics and the heavy-duty load bearing capacity greatly improves service life.
The unibody forged Four-wing guided valve & Full open seat features greater strength than traditional welded-wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation.
Valve inserts
Qingdao HNA Oilfield Machinery Co.,Ltd. Lancun Industrial Zone,Qingdao,China 266100
Phone: +86
E-mail:
Triplex Mud Pump Parts
Fluid End Expendables
Liners
HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liners, Chromium-plated Liners and Hardened Liners.
Premium Chromium Liners
HNA premium liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a high chromium iron inner sleeve. These liners feature a centrifugally cast high chrome iron sleeve which is machined and heat treated to a minimum uniform bore hardness of 62 RC. Each liner is machined to close tolerances to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life of the liner. HNA premium liners are made for superior performance under tough corrosive and abrasive conditions.
Ceramic Liners
HNA ceramic liners combine the strength of a forged steel outer shell with the abrasion and corrosion resistance of a ceramic inner sleeve. We provide Zirconia(ZrO3) Sleeves as well as Alumina(Al2O3.) sleeves., of which Ziconia exhibits better impact strength, higher hardness and be honed to finer surface finishes than alumina.
Другие товары поставщика
|
|
UNB-600 Mud Pump Bimetal Liner |
We are a large drilling tools, mud pump and Fluid End Expendables and mud pump spare parts manufacturer in China.
Handling Tools: Rotary Slips, Dri... |
|
|
National 8-P-80 Triplex Mud Pump Bimetal Liner |
HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liner... |
|
|
F-1600 Mud Pump Power End Pinion Shaft |
Power End Parts HNA supplies power end parts such as Crank shaft, Pinion shaft, Crosshead, Bull Gear, Pulsation Dampener, Frame and so on for follo... |
|
|
API клапан&сиденье для национальных 12-Р-160 буровой насос |
Отель HNA предлагает 5 различных типов клапанов &амп; сиденья, чтобы соответствовать вашим потребностям бурение, устраивающих практически всех попу... |
|
|
Буровой насос bomco/emsco F-1000 mud pump |
1. The fluid end assembly mainly consists of fluid end, valve assembly, liners and pistons. Fluid end is made of forged alloy steel and three flui... |
Все товары поставщика
Похожие товары
