Fabric Circular Sample Cutter

• 

Fabric Circular Sample Cutter Application Scope:
For sampling a variety of fabrics, paper and non-woven materials such as quasi-circular sample, which can be cut circular sample all kinds of wool, cotton, chemical fiber, knitting fabric. Used in the textile, paper, packaging, testing and scientific research industries.
Fabric Circular Sample Cutter product details:
Manual CD-like sheath includes a 60 × 45cm cutting mat-like, yellow rotary cutter (with a spare blade and a straight knife (with spare rapid cutter and a spare blade).

Fabric Circular Sample Cutter Features:
1. textile fabrics, paper, cardboard and other items dedicated sampling unit of weight of the appliance;
2. Aluminum alloy material, thickness adjustable, cork mat to protect the blade not easy to damage;
3. The sample size has a wide range, high precision, easy operation;
4. Round cut sampler suitable 100cm2 × 5mm thick cutting thickness;
5. With a cutting pad and four spare blades.

Fabric Circular Sample Cutter Instructions:
The sample will be cut in the rubber tile mat fabric, the fabric on the sampler disc, pull out the sampler on the locking device, rotated about 90 degrees, hand held onto the jacket in one hand and hold the corrugated hand wheel, and exert a certain pressure, and then hand wheel clockwise wave (angle greater than 90 degrees), then the circle and cut the sample
Immediately locking device after using the sampler, rotate to its original position, the blade is not exposed, so as not to hurt the hand and other items.

Fabric Circular Sample Cutter Structure and Adjustment:
Double blade cutter blade to a total of four, the circular external four equal parts, the blade can be replaced, the specific operation is: Loosen the Phillips screws (four screws on each piece), remove the blade plate and sampling blade change a new blade, the pressure on the blade plate, note the blade clockwise tangential port, and make four incisions in the same plane, and then tighten the cross screw
Instrument has ruled the bottom notch, for fixed samples, easy to cut, to prevent sample slippage.

Fabric Circular Sample Cutter Precautions:
1. The instrument is with sharp blade edge, not put your hand on the bottom, in order to avoid damage.
2. The instrument should be cut to take the rubber mat samples, wipe clean the instrument when it is not in operation, on the meter box to avoid damage.

Fabric Circular Sample Cutter Technical Parameters:
1. Sampling area: 100cm2;
2. Maximum cutting thickness: 5mm;
3. Dimensions: 160 × 160 × 110mm;
4. Weight: 2kg.

Другие товары поставщика

	MK2 fiber impurity analyzer	Fiber Impurity Analyzer / MK2 Fiber Impurity Analyzer is a special instrument for measuring the impurity content of fiber. It is mainly used to det...
	Air filter testing equipment	Air filter testing equipment can be used to detect the filtration efficiency and resistance of particles such as masks and filter materials in medi...
	Electronic Multifunction Socks stretcher	The Electronic Multifunction Socks stretcheris mainly used to determine the straight extension and transverse extension of stockings, swimwear, pan...
	Scrub Abrasion and Washability Tester	The Scrub Abrasion and Washability Tester is used to test the resistance of paint, varnish or coatings to scratching, wearing, an...
	Protective clothing water vapor permeable tester	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...

Похожие товары

	Bakon BK191: The Ultimate Tool for Soldering Iron Temperature Control	Продавец: Shenzhen Wikshu Technology Co.	Описание Термометр-тестер для паяльника Bakon BK191 (0 - 600 °C) Для ремонта пайки, Тестер те...
	MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux	Продавец: Phonefix	MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU...
	3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete	Продавец: Xiamen ChinShine Industry and Trade Corporation	– Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –...
	LUOWEI LW-PT03 LW-PT02 Силиконовая прокладка для посадки чипа ЦП	Продавец: Phonefix	Описание LUOWEI LW-PT03 LW-PT02 Платформа для установки чипов ЦП с термостойкой силиконовой подкл...
	AWithZ UF20B супер фарад конденсатор точечный сварочный аппарат для материнской платы аккумулятора PCB сварки	Продавец: С. так потрясена, что Technology Co.,Ltd.	ОписаниеAWithZ Новый аппарат для точечной сварки конденсаторов Farah UF20B Сварка 0,4 мм паяемой ...