Safety Helmet Electrical Insulation Tester

Product Introduction:

Safety hat electrical insulation performance tester used to test the electrical insulation performance of safety hat, high degree of automation, easy to operate, widely used in safety hat manufacturers and major quality inspection units.

Meet the standard:

GB/T2812-2006 Safety helmet test method

GB/T2811-2007 Safety helmet

Product Advantages:

Measures Critical Safety Property: Quantifies the electrical insulation capability of safety helmets, essential for protecting wearers from electrical hazards.

Standard Compliant: Designed to meet relevant national standards (GB/T 2812. GB/T 2811) for safety helmet electrical testing.

High Automation: Features a high degree of automation, making the test process more efficient, consistent, and easier for the operator.

Objective Quantitative Results: Provides digital readouts of current and voltage with specified accuracy.

Plastic Sink: Eliminates potential issues related to the conductivity of the test sink, ensuring accurate measurements.

Configurable Test Head: Allows customization of the test electrode to accommodate different helmet types or test needs.

Widely Used: Adopted by manufacturers and testing laboratories in the safety helmet industry.

Product Features:

Plastic sink or water bath system designed to contain water and accommodate the safety helmet for testing in a wet condition, without interfering with electrical measurements.

Electrodes for applying high voltage to the safety helmet, including a probe with a specific diameter (4mm) and hemispherical top.

LED digital display providing real-time readouts of current and voltage values during the test.

Capability to apply high voltage according to a specific sequence: increasing the voltage to 1200V ± 25V within 1 minute and maintaining it for 15 seconds.

Voltage regulator with a range of 1500V to control the applied voltage.

Built-in timer to control the duration of the high-voltage application, with a specified error ($pm$1%).

Accurate measurement of current and voltage, with expression value errors of $pm$1%.

Configurable test head die or electrode to meet various helmet testing requirements.

High level of automation for the test procedure.

Safety features (implied for high voltage testing) to protect the operator.

Technical features:

1. plastic sink, to solve the conductive stainless steel and metal sinks and other problems

2. LED digital display current, voltage value

3. Electrical insulation test head die can be configured according to customer requirements

Technical parameters:

1. the current expression value error of ±1%

2. voltage value error ±1%

3. timer value error ±1%

4. the diameter of the probe is 4mm, the top is hemispherical

5. The voltage is increased to 1200V±25V within 1min and maintained for 15s

6. voltage regulator: range 1500V

Другие товары поставщика

	Friction Tester for Non - woven Fabrics	Instrument Description This fabric friction tester can measure the static and kinetic friction coefficients of non - woven fabrics. It can be used...
	Leather Seam Fatigue Tester	Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo...
	Porton Thermal Manikin Equipment	Product Introduction: Porton-man was commissioned by the Defense Science and Technology Laboratory (DSTL) to accurately represent military users. ...
	2800 bar Pump Units	For concrete removal, heat exchanger cleaning, road marking removal,aireport runway marking removal,pipleline repair, high pressure cutting and pre...
	Automobile Wire Cross-linking Test Device	Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification...

Все товары поставщика

Похожие товары

	Air Intake Filter Test System	Продавец: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Продавец: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Продавец: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Продавец: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...