.

45-degree dry cleaning tester

Product Introduction:

The instrument is composed of a bottom plate, a control panel and a drum. The clothes to be washed and the dry cleaning agent are put into the drum together, and the rotation times are set to make the dry cleaning agent soak the clothes and dissolve the stains in the clothes during the rolling process of the drum. This instrument is mainly used to clean the sample before other tests.

Standards:

AATCC 162; 16 CFR Part 1610 ; FZ/T01083-2000.

Technical Parameters:

Instrument volume: 610×360×540mm

Weight: 50Kg

Cylinder volume: 11.4L

Cylinder rotation speed: 47.5±2.5r/m

Power supply: 220V 50Hz

Sample size: 304×304mm


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Automotive Wires Flammability Tester
Automotive Wires Flammability Tester Compliance Standards FMVSS 302 (Federal Motor Vehicle Safety Standard) ISO 6722 (Road Vehicle Cable Flammability) UL 94 (Tests for Flammability ...
Car seat static strength tester
Car seat static strength tester Applicable standards: GB 11550-2009"Car seat headrest strength requirements and test methods" : This standard specifies the static strength test r...
45-degree dry cleaning tester
45-degree dry cleaning tester Product Introduction: The instrument is composed of a bottom plate, a control panel and a drum. The clothes to be washed and the dry cleaning agen...
Automotive Seat Belt Buckle Bending Test Machine
Automotive Seat Belt Buckle Bending Test Machine Standard ISO 10195(Seat Belt Anchorage Hardware - Test Methods) ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restrain...
Cantilever Fabric Stiffness Tester
Cantilever Fabric Stiffness Tester Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application Fabric Stiffness Tester, is a practical equipment to determine the...
Все товары поставщика

Похожие товары

Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением Продавец: Shandong HUASU Plastic Technology Co.,Ltd. Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
PanEVAP & MVR system
PanEVAP & MVR system Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
PanGAP wide gap welded plate heat exchanger
PanGAP wide gap welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
PanBloc welded plate heat exchanger
PanBloc welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
PanBox welded plate heat exchanger
PanBox welded plate heat exchanger Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...