Automotive Wires Flammability Tester-QINSUN
Compliance Standards
FMVSS 302 (Federal Motor Vehicle Safety Standard)
ISO 6722 (Road Vehicle Cable Flammability)
UL 94 (Tests for Flammability of Plastic Materials)
LV 214-2 (Mercedes-Benz Flame Retardancy Spec)
SAE J1128 (Low Voltage Battery Cable)
Key Features
Vertical/horizontal flame chamber
Automatic flame application/retraction
Real-time temperature mapping
Smoke density measurement (0-100% obscuration)
Self-extinguishing time calculation
Measurement System
High-speed IR thermography (1000Hz)
Laser smoke particle counter
Microsecond-resolution timers
Automotive Options
EV battery fire simulation module
Toxic gas analyzer (HCN, CO, NOx)
High-voltage arc tracking detector
3D flame propagation analysis
Safety Systems
Automatic gas shutoff valve
Explosion-proof fume extraction
Emergency purge system
Thermal overload protection
Test Protocol Example (FMVSS 302)
Precondition sample @23°C/50% RH for 24h
Mount specimen horizontally in holder
Apply 38mm flame for 15s
Measure burn rate between 25-150mm marks
Calculate maximum spread rate ≤100mm/min
Technical Parameters
| Parameter | Specification |
|---|---|
| Flame Height | 20-175mm (±1mm) |
| Flame Temp | 950°C (±10°C) |
| Burn Duration | 0-999s (±0.1s) |
| Sample Size | 356×100mm (Max) |
| Gas Type | Methane/Propane (≥98% purity) |
| Burn Rate Accuracy | ±0.1mm/s |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive Wires Low - temperature Impact Tester | Standard: ISO 6722-1. ISO 14572: International benchmarks for electrical cable performance in low-temperature environments. ISO 19642: Road veh... |
 |
KES - QM Contact Coolness Tester | It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am... |
 |
Vapor Shrinkage Tester | I. Product Overview TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, pol... |
 |
Taber Abrasion Tester (Double-Head) | Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347 (glass/plastics) ASTM Standards: ASTM D1044 (transparent plas... |
 |
Footwear Cold Insulation Tester | Product Introduction Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test... |
