Wire Cut - through Tester for Ford Automotive Wires-QINSUN
Applicable Standard:
Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA
Technical Parameters:
1. Sensing method: High - precision load cell (sensor)
2. Capacity: 200KG
3. Cut - through speed: 10mm/min
4. Effective measurement range (%): 0.5 - 100
5. Accuracy class: Grade 1
6. Load accuracy: Within ±1% of the indicated value
7. Display: Controlled and recorded by computer software
8. Equipped with an automatic stop function upon cut - through
9. Overload protection: The machine will automatically activate protection when the load exceeds the maximum by 10%
10. Power system: AC servo motor
11. Fixture configuration: One set of fixtures selected according to the user's product requirements
12. Power supply: AC 220V±10%, 50HZ, 5A
13. Dimensions: 56X80X170cm
14. Diameter of the cut - through steel wire: 0.45mm
15. Cut - through test voltage: Less than 24V
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Car seat belt locking performance tester | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
 |
High Temperature Oxygen Index Tester | Application Evaluating material combustion performance in R&D. Quality control for product acceptance. High-temperature safety assessment in... |
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
 |
Automatic thermal deformation Vica softening point tester | Product Introduction: 1. Name: Thermal deformation, Vica softening point temperature tester 2. Model :G-1 3. Product introduction: thermal defor... |
 |
Geomembrane Hydrostatic and Permeability Tester | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cl... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
