Textile far infrared emissivity tester
Introduction
With the continuous advancement of technology, new types of fibers and textile products have emerged, leading to increasingly high demands on textile performance. To meet these requirements, various performance tests must be conducted, including far-infrared emissivity testing. This document introduces the principles, applications, and compliance standards of textile far-infrared emissivity testers.
Compliance Standards
GB/T 30127.4-2013.ISO 18562-3:2017
Testing Principle
The textile far-infrared emissivity tester determines the far-infrared performance of various textile products (including fibers, yarns, fabrics, nonwovens, and their products) through far-infrared emission measurement. The principle involves:
1. Placing a standard blackbody panel and sample on a heating plate sequentially
2. Adjusting the heating plate temperature to specified levels
3. Using a far-infrared radiation measurement system with spectral response coverage of 5μm~14μm to measure the radiant intensity of both the standard blackbody and sample after thermal stabilization
4. Calculating the sample's far-infrared emissivity through the ratio of radiant intensity between sample and standard blackbody
Applications
This tester is widely used in textile quality control for:
- Evaluating far-infrared properties of natural fibers (cotton, wool) and synthetic fibers (polyester, nylon)
- Testing emissivity performance of yarns and fabrics in different textile structures
- Quality assessment of nonwoven materials and finished garments
- Providing data support for product design optimization and production process improvement
Key requirements include:
- Test temperature range: 25°C~45°C
- Spectral measurement range: 5μm~14μm
- Use of certified standard blackbody panels
- Temperature control precision: ±0.5°C
- Emissivity calculation method: Radiant intensity ratio between sample and reference
Conclusion
The textile far-infrared emissivity tester is essential equipment for evaluating thermal radiation properties of textiles. Its applications include:
✅ Quality control of functional textiles (warmth-retaining, moisture-wicking)
✅ Performance evaluation of new fiber blends
✅ Research and development of smart textile materials
✅ Compliance testing for international market access
To ensure accurate results, strict adherence to standard operating procedures and regular calibration using certified reference materials are required.
Specification
| Item | Detail |
| Measuring range | 0.01-1.00 |
| Wavelength | 5-14μm |
| Testing temperature | 34℃ |
| Thermal plate | Φ60mm |
| Power supply | 220V 50-60 Hz |
| Dimensions | 160mm×180mm×350mm 6.30inch×7.07inch×13.78inch |
| Net weight | 15 kg 33.07lb |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Large Flame Flammability Tester | IntroductionThe Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It&rsq... |
 |
Polarimeter | Product advantages: 1. Better temperature control design, fast and accurate results Temperature is the external factor that has the greatest influ... |
 |
Wool Fineness Analyzer | Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample ... |
 |
Filter Media Tester-QINSUN | The Filter Media Dynamic Filtration Performance Testeris mainly used to test the filtration performance of filter materials. The equipment itself i... |
 |
MARK-II Slip Resistance Tester | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
