Leakage trace tester
I. Product Overview
TheLeakage Trace Testeris a precision diagnostic tool designed to visually identify and analyze fluid/gas leakage paths in sealed systems. It employs non-destructive testing methods, combining thermal imaging and dye penetration technology to highlight leaks with fluorescent or colored markers.
- Type: Portable handheld device
- Detection Sensitivity: 0.1μm micro-leaks
- Working Modes: Fluorescent dye tracing / Smoke injection visualization
- Power Supply: Rechargeable Li-ion battery (8h continuous operation)
II. Technical Specifications
| Parameter | Specifications |
|---|---|
| Detection Accuracy | ±0.5mm leak path resolution |
| Working Temperature | -20°C to 150°C |
| Illumination Range | UV-A 365nm wavelength (1000μW/cm² intensity) |
| Smoke Generation | Non-toxic mineral oil-based vapor (OSHA compliant) |
| Dimensions | 280×120×65mm (L×W×H) |
III. Key Features
- Dual Detection Modes:
- Fluorescent Mode:Requires UV light for trace visualization
- Smoke Mode:Generates visible vapor for pressurized systems
- Smart Indicator System:
- LED severity scale (green/yellow/red)
- Audio alarm with dB level adjustment
- Ergonomic Design:
- Anti-slip rubberized grip
- Rotatable 360° detection head
- IP Rating: IP54 dust/water resistance
IV. Compliance Standards
- ISO 10110-3 (Optical fluid leakage testing)
- ASTM E1137 (Dye penetrant standard)
- CE EN 61010-1 (Electrical safety)
V. Typical Applications
- Automotive:Fuel injector testing, brake system diagnostics
- Industrial:Pipeline joint inspection, HVAC system leak mapping
- Aerospace:Hydraulic fitting validation under pressure
- Medical:Sterile seal integrity verification
Standard Operating Procedure:
- Surface Preparation: Clean test area with isopropyl alcohol
- Dye Application: Apply UV tracer (0.5ml/cm²) for 15min dwell time
- Inspection: Use 5W UV lamp at 30cm distance, scan at 45° angle
- Post-Test: Neutralize residues with pH-balanced cleaner
Safety Precautions:
- Avoid direct eye exposure to UV light
- Use PPE when handling flammable dye solutions
- Maintain 1m clearance from open flames
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Paper absorbance tester | Introduction: It is an instrument used to determine the surface water absorption of coated paper and cardboard, including corrugated board. It is ... |
 |
Automotive Wires Low - temperature Winding Tester | The low - temperature winding tester for automotive wires is used to assess and determine the performance of circular wire cables or circular ins... |
 |
Adhesion Tester | The tack - holding tester, also known as the tack - holding property tester, tack - holding force tester, or holding - power tester, is a device sp... |
 |
Car seat headrest static strength tester | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test methods" : This standard specifies the static strength... |
 |
Scratch-resistance testing machine | Product Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface ... |
Похожие товары
 |
Blanket Flammability Test Machine | Продавец: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Продавец: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Продавец: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Продавец: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Продавец: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
