Floor Material Burning Performance Tester
Thefloor coverings flammability testeris used to tester a variety of flooring materials, such as: textile carpets, cork, wood, rubber and plastic flooring and floor spray materials. The results can reflect the combustion properties of the floor material (including the substrate), which is used in the test combustion chamber to ignite the floor material placed horizontally and exposed to the tilted thermal radiation field with a small flame. It can be used to evaluate the material flame Communication ability.
Standards
ASTM E648-15 Standard test method for critical radiant flux of floor-covering systems using radiant heat energy source
BS EN ISO Reaction to fire test for flooring-Part1: Determination of the burningbehavior using a radiant heat source
GB/T 11785-2005 Determination of Combustion Performance -Floor material radiation heat source method
ISO 9239-1: Flooring fire reaction test- Part 1: Combustion performance of flooring materials tested by radiant heat
ASTM E 648: Critical Radiant Flux of Floor standard test - covering system uses radiant heat energy
ASTM E 970: Using a Radiant Heat Energy Source, test insulation floorinsulation insulation standard test for Critical Radiant Flux using a radiant heat energy.
NFPA 253: Standard Test Method for using radiant heat energy, test plates overlay system Critical Radiant Flux
Technical Parameters
| Items | Parameters |
| Radiant heat source | Radiation surface size is (300 × 450) mm ± 10mm, the radiation plate can withstand the high temperature of 900 ℃ |
| Specimen fixture | It is made of refractory and (2.0 ± 0.1) mm L-shaped stainless steel. The size of the exposed surface of the specimen is (200 ± 3) mm × (1015 ± 10) mm |
| Igniter | Stainless steel igniter is used for ignition of the specimen. The center line on the average distribution of 19 diameter 0.7mm a radial hole, the center line of 60 degrees on the average distribution of 16 diameter 0.7mm radial hole |
| Propane rotor flow | Propane gas flow can control at (0.026 ± 0.002) L / s, to ensure that the ignition flame height is (60 ~ 120) mm |
| Power supply | AC380V three-phase five-wire system |
| Smoke removal rate | 2.5 ± 0.2 m / s |
| Smoke capacity | 39 ~ 85 m3/ min |
| Items | Parameters |
| The heat balloon anemometer measures the flow rate of the exhaust channel with an accuracy is ± 0.1 m / s | |
| Water-cooled heat flux meter | Heat flux meter Measuring range: 0 ~ 15Kw / m² |
| Heat flux range accuracy | ± 0.2Kw / m2 |
| Heat flux accuracy | <± 3% |
| Temperature sensor | K-type stainless steel installed two thermocouple, diameter is 3.2 mm. Respectively installed in the floor material radiation test box and the flue from the top of the box flue (150 ± 2) mm |
| Radiation pyrometer | The test range is (480 ~ 530) ℃ (black body temperature). The accuracy is ± 0.5 ℃. It is about 1.4m away from the radiation plate. The sensitivity of radiation pyrometer is constant in the wavelength of 1μm to 9μm range |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rubbing Color Fastness Tester | Application This instrument is applicable to the test of color fastness in textile, knitwear, leather, electrochemical plate and printing Accesso... |
 |
Walk-in Constant Temperature and Humidity Test Chamber | The Walk-in Constant Temperature and Humidity Test Chamber is suitable for conducting accelerated humidity and heat testing, cyclic humidity and he... |
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
Elmendorf Tearing Strength Tester - Test Equipment | TheManual Tear Strength Testeris a precision instrument designed to measure the tear resistance of materials using standardized methods such as the... |
 |
Coated fabric flexing resistance testing machine | The instrument tests coated fabric strips by winding them into cylindrical samples between two rotating cylinders. One cylinder reciprocates along ... |
Похожие товары
 |
Air Intake Filter Test System | Продавец: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Продавец: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Продавец: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Продавец: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
