Building products ignitability Apparatus

• 

This apparatus is manufactured to conform to ISO 5657.The Apparatus has been designed,principally for testing building materials and composites, but it is capable of testing anysample of size 165mm × 165mm and up to a maximum of 70mm thick. The Apparatus measures

the ignition characteristics of exposed surfaces of essentially flat materials andspecimens.

Standards

ISO 5657

GB/T 14523

Specification

1.The radiation cone is made of 304 stainless steel;

2.All internal fixtures are made of stainless steel;

3.The specimen support frame: thickness 1.5mm,

4.The calibration board is made of ceramic fibre of density (200土50)kg/m3. with sidesmeasuring 165 mm and of thickness not less than 20 mm.

5.The rated power of the conical heater is 3000W, the heat output is 0-70kw / m2. and theresolution is 0.5kw/m2;

6.Thermocouple has automatic cold node compensation.

7.The Medtherm heat flux meter imported from the USA with a water cooling system. Accuracy± 3%, reproducibility deviation 0.5%;

8. Ignition device: automatic ignition.

9.Imported gas flowmeter, control of gas flow precisely

10.Install filter in propane gas path; prevent pollution test gas path system;

11.Equipped with check valve to prevent danger;

12.PLC&touch screen automatic control system;

13.Temperature monitor 0 ℃ ~ 1000 ℃; control heater temperature resolution ± 2 ℃;

14.Nominal range of balance 5000g, accuracy 0.1g;

15.The test data is automatically recorded and automatically saved;

16.The exaust hood is optional.

Другие товары поставщика

	MMT Liquid Water Separation Tester	TheMMT Liquid Water Separation Testeris a precision instrument designed to evaluate the water repellency and separation efficiency of textile mater...
	High-efficiency Filter Test Bench - Test Equipment	The high-efficiency filter scanning test bench can test the efficiency and resistance of filters under the rated air volume conditions. The fundame...
	Laboratory Automotive Wash and Friction Testing Bench	The Laboratory Automotive Wash and Friction Testing Bench is designed to evaluate the scratch resistance of automotive coating systems through cont...
	Taber abrasion tester	Standards： ASTM D3884 、 ASTM D1175 、 ASTM D1044 、 ASTM D4060 、 TAPPI T476 、 ISO 9352 、 ISO 5470-1 、 JIS K7204 、 JIS A1453、 JIS K6902 、 JIS L1096 、...
	Puncture Strength Tester	Introduction to the Device This device is a testing machine used to measure the "puncture strength" when a sample is penetrated by a test needle. A...

Похожие товары

	Air Intake Filter Test System	Продавец: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Продавец: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Продавец: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Продавец: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...