Textile far infrared emissivity tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
Introduction
With the continuous advancement of technology, new types of fibers and textile products have emerged, leading to increasingly high demands on textile performance. To meet these requirements, various performance tests must be conducted, including far-infrared emissivity testing. This document introduces the principles, applications, and compliance standards of textile far-infrared emissivity testers.
Compliance Standards
GB/T 30127.4-2013.ISO 18562-3:2017
Testing Principle
The textile far-infrared emissivity tester determines the far-infrared performance of various textile products (including fibers, yarns, fabrics, nonwovens, and their products) through far-infrared emission measurement. The principle involves:
1. Placing a standard blackbody panel and sample on a heating plate sequentially
2. Adjusting the heating plate temperature to specified levels
3. Using a far-infrared radiation measurement system with spectral response coverage of 5μm~14μm to measure the radiant intensity of both the standard blackbody and sample after thermal stabilization
4. Calculating the sample's far-infrared emissivity through the ratio of radiant intensity between sample and standard blackbody
Applications
This tester is widely used in textile quality control for:
- Evaluating far-infrared properties of natural fibers (cotton, wool) and synthetic fibers (polyester, nylon)
- Testing emissivity performance of yarns and fabrics in different textile structures
- Quality assessment of nonwoven materials and finished garments
- Providing data support for product design optimization and production process improvement
Key requirements include:
- Test temperature range: 25°C~45°C
- Spectral measurement range: 5μm~14μm
- Use of certified standard blackbody panels
- Temperature control precision: ±0.5°C
- Emissivity calculation method: Radiant intensity ratio between sample and reference
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Sealing Strip Wear Test Machine - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The TL52057 automotive sealing strip abrasion tester is a professional device spec... |
 |
fabric wet adhesion performance tester - lab instrument | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com The tack - holding tester, also known as the tack -... |
 |
Contact heat transmission test machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com This part of ISO 12127 specifies a test method desi... |
 |
Snap Button Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standard ASTM D7142-2/F963: Standard Consumer Safety Specification for Toy Safe... |
 |
Spray Rating Tester - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT... |
Похожие товары
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Продавец: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Продавец: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Продавец: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Продавец: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Продавец: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
