Electro-hydraulic servo dynamic fatigue testing machine
The Electro-Hydraulic Servo Dynamic and Static Fatigue Testing Machine is designed for comprehensive mechanical testing of metals, non-metals, structural components, standard parts, and new high-performance materials, including ultra-strength steel, titanium alloys, and reinforced synthetic fibers. The machine can perform tensile, compression, static, dynamic, low-cycle fatigue, crack growth, and fracture mechanics tests. Fatigue parameters such as fatigue life, cyclic elastic modulus, and fatigue crack growth rate can be measured under symmetric, asymmetric, and alternating load cycles.
Application
(1) Tensile and compression testing of metallic and non-metallic materials.
(2) Fatigue and low-cycle fatigue testing under cyclic or alternating loads.
(3) Measurement of cyclic elastic modulus and fatigue life of components.
(4) Fracture mechanics testing and fatigue crack growth analysis.
(5) Evaluation of structural parts and standard components under dynamic load.
(6) Testing of high-performance materials, including ultra-strength steel, titanium alloy, and reinforced synthetic fibers.
(7) R&D, quality control, and material certification in metallurgy, aerospace, automotive, and engineering laboratories.
Standards
(1) GB/T 2611-2007 — General Technical Requirements for Testing Machines
(2) GB/T 16826-2008 — Hydraulic Servo Universal Testing Machine
(3) GB 3075 — Axial Fatigue Testing of Metals
(4) JB/9379-2002 — Technical Conditions for Tension and Compression Fatigue Test Machines
(5) GB/T 228-2010 — Metallic Materials — Tensile Test at Room Temperature
(6) HB 5287 — Axial Loading Fatigue Test Method for Metal Materials
(7) EN 10002 — Tensile Test of Metallic Materials
(8) JG 556-2011 — Axial Force Fatigue Testing Machine
(9) HG/T 2067-1991 — Technical Specifications for Rubber Fatigue Testing Machines
(10) ASTM E399-09 — Standard Test for K_IC of Metallic Materials (Plane-Strain Fracture Toughness)
(11) ASTM E1820-2001 — JIC Test Standard for Measuring Fracture Toughness
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fabric Coolness Tester - lab instrument | It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am... |
 |
Dry fallen wadding tester | The G275 dry fallen wadding tester evaluates shedding performance of medical nonwovens and textiles under dry conditions by subjecting samples to t... |
 |
fatigue testing machine | Testing Equipment | Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo... |
 |
Blanket Flammability Test Machine | Bed Blanket Flammability Tester is used to detect the flame retardant performance of the bed blanket fabric and the flame spread property of the fa... |
 |
Protective Clothing Liquid Static Pressure Tester | The Protective Clothing Liquid Static Pressure Tester is designed to evaluate the liquid penetration resistance of breathable protective clothing m... |
Похожие товары
 |
Blanket Flammability Test Machine | Продавец: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Продавец: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Продавец: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Продавец: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Продавец: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
