Battery Nail Penetration Tester

Battery Nail Penetration Tester is designed for evaluating the safety performance of lithium-ion batteries and battery packs under extreme internal short-circuit conditions.

The tester simulates thermal runaway caused by mechanical penetration by driving a rust-free steel nail through the center of the largest surface of the battery at a controlled speed and force. The test is conducted at an ambient temperature of 20 °C ± 5 °C, with temperature monitoring to assess battery reaction such as ignition, explosion or thermal instability.

Application

(1) Consumer Electronics Batteries

Lithium-ion batteries used in smarts, tablets, laptops, power banks, Bluetooth ears, smart watches and wearable devices.

(2) Power Tool Batteries

Rechargeable lithium battery packs for electric drills, screwdrivers, garden tools and portable industrial tools.

(3) Electric Vehicle Power Batteries

Cylindrical, prismatic and pouch lithium-ion cells and battery modules used in electric vehicles (EV), electric motorcycles and hybrid electric vehicles (HEV).

(4) Energy Storage Batteries

Lithium battery cells and modules used in residential, commercial and industrial energy storage systems (ESS).

(5) New Energy Battery Systems

Battery packs applied in solar energy storage systems, backup power supplies and communication base stations.

(6) Small Portable Lithium Batteries

Button cells, coin cells and small-capacity lithium batteries used in medical devices, sensors and portable electronic equipment.

(7) Battery Certification & Compliance Testing

Applicable for safety testing in battery manufacturers, third-party laboratories and certification institutions.

Standards

(1) GB/T 18332.2-2001

General Specification for Lithium-Ion Batteries

(2) MT/T 1051-2007

Safety Performance Test Method for Lithium-Ion Batteries Used in Coal Mines

(3) GB/T 31485-2015

Safety Requirements and Test Methods for Power Batteries of Electric Vehicles

(4) GB/T 31241-2014

Safety Requirements for Lithium-Ion Batteries and Battery Packs for Portable Electronic Products

(5) UN 38.3

United Nations Manual of Tests and Criteria – Section 38.3 (Transport of Dangerous Goods)

(6) IEC 62133

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Applications

(7) UL 1642:2012

Standard for Lithium Batteries

Features

(1) Controlled nail penetration speed and stable penetration force to ensure repeatable test results.

(2) Supports multiple steel needle diameters to meet different standard requirements.

(3) Hydraulic or motor-driven penetration system for high penetration force stability.

(4) Integrated pressure sensing system with LED force display.

(5) Fully enclosed explosion-proof box design for enhanced operator safety.

(6) Fire-resistant, corrosion-resistant and easy-to-clean structure.

(7) Designed for laboratory and production safety testing environments.

Technical Parameters

Parameter Category	Specification
Nail Diameter	ф2 mm – ф8 mm high-temperature resistant steel needle
Penetration Speed	10 – 40 mm/s
Penetration Force	Approx. 2000 kg
Stroke	Approx. 200 mm
Needle Tip to Base Distance	250 mm
Clamping Distance	150 mm
Driving Mode	Hydraulic drive or motor drive
Force Display	Pressure sensing LED display
Test Environment	20 °C ± 5 °C
Explosion-Proof Box Size (W × H × D)	Approx. 450 × 750 × 550 mm
Explosion-Proof Box Material	Galvanized steel with baked paint finish
Machine Dimensions (L × W × H)	Approx. 1640 × 570 × 730 mm
Control Box Size (W × H × D)	Approx. 300 × 260 × 170 mm
Equipment Weight	Approx. 75 kg
Power Supply	Single-phase AC 220 V, 50 Hz

Другие товары поставщика

	Button falling weight impact tester	Testing Standards: ASTM D5171 Application:Button falling weight impact testeris used to determine the impact resistance of plastic sew-through fla...
	Cell thickness gauge	The Cell Thickness Gauge is a precision measuring instrument designed for accurate thickness measurement of lithium-ion battery cells. The system i...
	Schopper Abrasion Tester	Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust...
	byk-gardner scrub abrasion tester	Wet Abrasion Scrub TesterIntroductionThe painted or uncoated surface need use a brush, sponge, scouring pad, sandpaper or other methods to test the...
	Single Cable Vertical Flame Tester	Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determin...

Все товары поставщика

Похожие товары

	Blanket Flammability Test Machine	Продавец: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Продавец: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Продавец: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Продавец: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Продавец: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...