.

Glow wire tester,EN 60695 glow wire,Fire hazard tester for electrical insulators

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

It is used in the evaluation of flammability tests and light-off temperature tests for electrical equipment and its components and accessories, as well as solid electrical insulating materials or other solid flammable materials.

It is used for the test of ignition hazard of electronic and electrical products, the evaluation of hot burning performance and the test of high temperature resistance.

It is used to determine the light-off property, light-off temperature, flammability and flammability index of solid insulating materials and other solid combustible materials.

It is used to test flame retardant properties for the insulated enclosure of household appliances, switch panels, printed circuit boards,and insulating materials.

It is applicable to the performance verification of new products, quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technical supervisiondepartment, etc.

Standards

ASTM D 6194-03:Standard Test Method for Glow-Wire Ignition of Materials

ASTM D6194:Standard Test Method for Glow-Wire Ignition of Materials

IEC 60695-2-10:2021::Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

IEC 60335:Household and similar electrical appliances – Safety

IEC60695-2-1:Fire hazard testing - Part 2-1: Test methods - Section 1: Glow-wire test methods - General

IEC60695-2-10:Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

IEC60695-2-11:Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products

IEC60695-2-12:Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

IEC60695-2-13:Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

UL 746 A:Standard for Polymeric Materials - Use in Electrical Equipment Evaluations

VDE 0620:Electrical Appliances - Safety Requirements for Household and Similar Purposes

GB/T 5169.10-2006:Fire hazard testing for electric and electronic products - Part 10: Glow-wire test method - General

EC :Fire hazard testing for Electrical and electronic products -- Part 10: Glowing-wire/ Hot-wire based test method, Glowing-wire apparatus and common test procedure.

GB/T 5169.11-2006/IEC :Fire hazard testing for Electrical and electronic products -- Part 11: Glowing-wire/Hot wire basic test method, Glowing-wire flammability test method for finished products.

GB/T 5169.12-2006/IEC :Electrical and electronic products ,Part 12: Glowing- wire/Hot-wire based test method, Glowing-wire flammability index (GWFI) test method for materials.

GB/T 5169.13-2006/IEC :Electrical and electronic products ,Part 13: Glowing- wire/Hot wire basic test method, Glowing-wire flammability (GWFI) test method.

Feature

Transparent safety door

The heat-resistant glass observation window allows the test to be observed at any time during the test while keeping the test free from external environmental disturbances.

Automatic heating, illumination, exhaust device

Glowing-wire automatic heating timing, equipped with automatic control of the glowing-wire contact position, precise control, convenient and reliable, and the test device is equipped with lighting and exhaust.

Intelligent touch screen control panel

The microcomputer control system is more efficient and reliable, and the programmable 7-inch color LCD touch screen realizes various functions such as control, detection, calculation and data display.

Stepping motor control - accurate moving speed

The moving speed of the sample is controlled by high-end stepping, which has high precision and long service life. In addition, the test device is equipped with flame ruler, and the flame height can be observed at any time during the test.

Sample rack dis-assembly type design

The sample holder of the test device can be removed for loading and cleaning,and it use physical pressure, which has precise pressure,convenient operation and high efficiency.

Parameters

Enclosure: It is equipped with observation window, inner black fireproof material coating.

special standard ring, horizontal static Temperature sensing delay : 1.7S

Control screen: Intelligent touch Observation window: transparent

Transformer parameters: 500VA, secondary: 2.5V, 150A Sample load: 1.0N ± 0.1N

Test speed: 10mm/s ~~25mm/sadjustable

Glowing depth: 0~9mm can be preset

End of test: buzzer sounds, test piece automatically detaches

which is controlled by high-precision steppermotor. Glowing time: 0~99s

Test cabinet size: 885mmX580 mm× 1000 mm

Effective volume ofthe test area : ≥0.5m3

Pressure limiting depth: 7mm

Exhaust pipe diameter: 100mm

Testtemperature: room temperature~999C (adjustable)

Physical dimension: 1000mm×650mm×1250mm

Glowing-wire material: ¢4mm, Ni/Cr (80/20),

Weight: 90kg

Temperature measuring element: armored K-type thermocouple(¢0.5mm), -200~1300C, precision 1C

Power supply: 220V 50Hz

Test Procedures

The operating procedure for the hot-wire test apparatus includes the following steps:

Checking the instrument: Turn on the power switch and check if the instrument is functioning properly.

Setting the temperature: Adjust the temperature to the required test temperature and wait until the temperature display shows the desired temperature.

Starting the test: Press the start button to begin the test.

Observing the test sample: Observe the residue dropped from the test sample during combustion. Press the stop button immediately when the sample stops burning.

Recording the results: Record the flame height during combustion. At the end of the test, press the exhaust button to remove the smoke.

Cleaning the equipment: Turn off the power switch, remove the test sample, record the test results, clean the dirt inside the chamber, close the exhaust vent, and turn off the main power switch.

These steps ensure the accuracy and safety of the hot-wire test apparatus. Operators should receive regular training to ensure the reliability and comparability of the test results.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Heat Flow Method for Thermal Conductivity Measurement
Heat Flow Method for Thermal Conductivity Measurement Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument complies with and references the following international and nati...
Laser Interferometry Compression Deformation Measurement System
Laser Interferometry Compression Deformation Measurement System Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The Laser Compression Deformation Tester for sealing strips is designed for a...
Aerosol Foams Flammability Tester,Automatic Reaction Calorimeter
Aerosol Foams Flammability Tester,Automatic Reaction Calorimeter Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This product complies with "Recommendations on the Transport of Dange...
G506 Filter Performance Tester
G506 Filter Performance Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM F2100:Standard Specification for Performance of Materials Used in Medical F...
Bundesmann Rain Tester | ISO 9865 Waterproof Fabric Testing Machine Manufacturer
Bundesmann Rain Tester | ISO 9865 Waterproof Fabric Testing Machine Manufacturer Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Rainfall portion consists of 300 identical drips for uniform pr...
Все товары поставщика

Похожие товары

Laser Chuck
Laser Chuck Продавец: 00000 Laser Chuck Introduce foreign advanced technology and management concept, High precision pro...
Power Pallet Jack For Sale
Power Pallet Jack For Sale Продавец: Jinan Hulk Machinery Co., Ltd Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac...
Multi Directional Forklift For Sale
Multi Directional Forklift For Sale Продавец: Jinan Hulk Machinery Co., Ltd Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu...
Narrow Aisle Forklift For Sale
Narrow Aisle Forklift For Sale Продавец: Jinan Hulk Machinery Co., Ltd Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide...
Electric Order Picker Supplier
Electric Order Picker Supplier Продавец: Jinan Hulk Machinery Co., Ltd Electric Order Picker Supplier Electric Order Picker Supplier As an supplier, we offer a co...