Vacuum Friction and Wear Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Vacuum Friction and Wear Tester integrates a proven friction and wear testing mechanism into a sealed vacuum chamber, enabling reliable tribological testing under controlled vacuum conditions. By reproducing low-pressure environments that are difficult to simulate with conventional equipment, this system makes friction and wear evaluation under vacuum straightforward and repeatable. It is especially suited for performance assessment of materials, coatings, and components used in aerospace, advanced materials research, and emerging technologies where ambient-pressure testing is insufficient.
Application
This tester is designed for friction and wear evaluation in vacuum or reduced-pressure environments, covering a wide range of materials and surface treatments.
Typical applications include:
Tribological performance testing of aerospace structural materials under vacuum
Evaluation of solid lubricants and dry-film coatings in space-simulated environments
Friction and wear assessment of ceramics, precision metals, and surface-engineered materials
Research on new materials and technologies requiring environmental control
Comparative testing of coatings, polymers, and composites under vacuum conditions
Applicable test specimens include metal samples, ceramic components, coated substrates, polymer materials, and functional surface layers.
Standards
The Vacuum Friction and Wear Tester supports or is applicable to the following international and industry standards:
NASA / SAE AMS 3150 (Vacuum friction and wear testing of aerospace materials)
ESA PSS-01-705 (Friction and wear testing for space application materials under vacuum)
GB/T 6040-2008 (Metallic surface wear resistance test method)
GB/T 10375-2008 (Tribological test methods – reciprocating friction and wear testing)
ISO 12137-2 (Abrasion resistance of coated fabrics and films – environmental testing)
ISO 20502 (Fine ceramics and coatings scratch / wear testing, adaptable to vacuum conditions)
JIS L 0849 (Abrasion resistance test method for plastic products, optional vacuum conditions)
JIS P 8139 (Friction and wear performance evaluation of coatings, applicable in vacuum chambers)
Parameters
| Parameter Category | Specification |
|---|---|
| Vertical Load | 10–1000 g |
| Loading Method | Weight loading, switchable configuration |
| Specimen Fixing Method | Central bolt fixing (adjustable to specimen shape); vacuum chuck (optional) |
| Force Sensor | Capacity: 9.8 N; Measurement accuracy: ±0.098 N |
| Upper Specimen Holder | Dedicated clamping fixture |
| Lower Specimen Fixing | Bolted to rotating worktable |
| Rotating Table Size | φ60 mm |
| Rotational Speed Range | 1–2000 rpm |
| Vacuum Pump System | Turbomolecular pump combined with rotary pump |
| Dynamic Strain Amplifier | Integrated within control rack |
| Friction Force / External Output | External output terminal on control rack |
| Data Analysis System | General-purpose friction analysis software |
Features
Vacuum-integrated tribological testing structure
A well-established friction and wear testing mechanism is housed within a vacuum chamber, enabling accurate testing under low-pressure conditions.
Stable and reliable loading system
The balanced weight loading method allows precise load application starting from low loads, ensuring consistent contact conditions during testing.
Flexible test configuration
The rotating worktable supports a wide range of test modes, including optional high-speed wear testing and customized low-load configurations.
Wide vacuum capability
The standard configuration achieves vacuum levels down to 10 Pa, with optional high-vacuum specifications available to meet specialized testing requirements.
Integrated data acquisition and analysis
Friction force signals are captured via a dedicated sensor and processed using professional tribological analysis software for reliable result interpretation.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
3 Metre Cube Smoke Density Tester ，IEC61034，Smoke Density Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com None halogen cables and materials are required to measure smoke density; the main principle... |
 |
Cartridge Dynamic Cycle Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ISO 23840 — Hydraulic fluid power — Filters — Evaluation o... |
 |
Rubber Low Temperature Brittleness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubber Low Temperature Brittleness Tester determines the temperature at which rubber an... |
 |
Large Scale Vertical Fire Resistance Test Furnace，Long-lasting fire resistance furnace for coatings | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description Fire resistance performance of materialprovideimportant information for evalua... |
 |
Knee Joint Prostheses Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, in... |
Похожие товары
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
