Thermal Conductivity Tester (Heat Flow Method)
Get a quote：
Web: qinsun-lab.com
Email：serving@qinsun-lab。com
Thermal Conductivity Tester (Heat Flow Method) is a high-precision instrument designed for measuring the thermal resistance, thermal conductivity, and interface contact thermal resistance of thin heat conductors, solid electrical insulation materials, thermal grease, resins, rubber, beryllium oxide ceramics, and aluminum oxide ceramics. The device can test solid sheet materials directly, and with the use of a sample frame, it can also measure powdered and paste materials. The tester is designed and manufactured in full compliance with ASTM D5470-2017 standards and has benefited from over 20 years of production experience, ensuring reliability, mature performance, and high testing accuracy. The system features servo-controlled precise automatic pressing, automatic thickness measurement, 6-point temperature gradient detection, and computer-controlled fully automatic operation. The built-in thermal guard around the test rod reduces environmental temperature influence, allowing accurate measurements of thermal conductivity, thermal resistance, and interface contact thermal resistance under varying pressures and temperatures.
The instrument is widely used in universities, research institutions, quality inspection laboratories, and industrial production plants for material thermal property analysis.
Standards
The instrument complies with:
MIL-I-49456A – Insulating Sheet Material, Thermally Conductive Resin, Glass-Fiber Reinforced Thermal Materials
GB/T 5598-2015 – Method for Determining Thermal Conductivity of Beryllium Oxide Ceramics
GB/T 29313-2017 – Test Methods for Thermal Conductivity of Electrical Insulation Materials
ASTM D5470-2017 – Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range | 0.01–50 W/m·K (standard), 5–500 W/m·K (high conductivity mode, automatic software switching) |
| Thermal resistance range | 0.05–500 cm²·K/W |
| Sample size | Φ30 mm or 20×20 mm (standard); custom sizes: Φ15. Φ50. 25.4×25.4 mm |
| Sample thickness | 0.001–50 mm (standard); typical 0.02–20 mm |
| Hot plate temperature range | Room temperature–99.99 °C (standard); optional 299.9 °C or 500 °C |
| Cold plate temperature range | 0–99.99 °C; precision 0.01 °C (with high-precision low-temperature water bath) |
| Pressure range | 0–1000 N; servo motor controlled; precision 0.1 N |
| Thickness measurement range | 0–50 mm; resolution 0.001 mm; automatic |
| Sample quantity | 1 piece (single or stacked layers) |
| Measurement accuracy | Thermal conductivity/thermal resistance ≤3%; contact thermal resistance ≤5% |
| Test modes | Thermal resistance under varying pressures; material thermal conductivity; contact thermal resistance at different pressures; aluminum/composite boards; aging reliability tests; high-conductivity materials; compression performance tests |
| Automation | Computer-controlled fully automatic measurement and report output |
| Power supply | 220 V / 50 Hz; 1000 W |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive connector insertion and withdrawal force testing machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com StandardsDesigned to meet rigorous automotive industry standards, including ISO 50... |
 |
MMT Liquid Water Separation Tester | Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheMMT Liquid Water Separation Testeris a precision instrument designed to evaluat... |
 |
True Body Weight Ingress Egress Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email：serving@qinsun-lab。com The True Body Weight Ingress/Egress Tester is a spec... |
 |
Fabric UV resistance tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Fabric UV Resistance Tester is designed to simulate solar UV radiation and eva... |
 |
Single chip liquid crystal touch impact testing machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Liquid crystal touch impact testing machine is mainly used for hard plastics (incl... |
Похожие товары
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Продавец: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
