Electrical flammability tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM D 6194-03:Standard Test Method for Glow-Wire Ignition of Materials
ASTM D6194:Standard Test Method for Glow-Wire Ignition of Materials
IEC 60695-2-10:2021:：Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60335:Household and similar electrical appliances – Safety
IEC60695-2-1:Fire hazard testing - Part 2-1: Test methods - Section 1: Glow-wire test methods - General
IEC60695-2-10:Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC60695-2-11:Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
IEC60695-2-12:Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
IEC60695-2-13:Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
UL 746 A:Standard for Polymeric Materials - Use in Electrical Equipment Evaluations
VDE 0620:Electrical Appliances - Safety Requirements for Household and Similar Purposes
GB/T 5169.10-2006:Fire hazard testing for electric and electronic products - Part 10: Glow-wire test method - General
EC :Fire hazard testing for Electrical and electronic products -- Part 10: Glowing-wire/ Hot-wire based test method, Glowing-wire apparatus and common test procedure.
GB/T 5169.11-2006/IEC :Fire hazard testing for Electrical and electronic products -- Part 11: Glowing-wire/Hot wire basic test method, Glowing-wire flammability test method for finished products.
GB/T 5169.12-2006/IEC :Electrical and electronic products ,Part 12: Glowing- wire/Hot-wire based test method, Glowing-wire flammability index (GWFI) test method for materials.
GB/T 5169.13-2006/IEC :Electrical and electronic products ,Part 13: Glowing- wire/Hot wire basic test method, Glowing-wire flammability (GWFI) test method.
Parameters
|
Enclosure: It is equipped with observation window, inner black fireproof material coating. |
special standard ring, horizontal static Temperature sensing delay : 1.7S |
|
Control screen: Intelligent touch Observation window: transparent |
Transformer parameters: 500VA, secondary: 2.5V, 150A Sample load: 1.0N ± 0.1N |
|
Test speed: 10mm/s ~~25mm/sadjustable |
Glowing depth: 0~9mm can be preset |
|
End of test: buzzer sounds, test piece automatically detaches |
which is controlled by high-precision steppermotor. Glowing time: 0~99s |
|
Test cabinet size: 885mmX580 mm× 1000 mm |
Effective volume ofthe test area : ≥0.5m3 |
|
Pressure limiting depth: 7mm |
Exhaust pipe diameter: 100mm |
|
Testtemperature: room temperature~999C (adjustable) |
Physical dimension: 1000mm×650mm×1250mm |
|
Glowing-wire material: ¢4mm, Ni/Cr (80/20), |
Weight: 90kg |
|
Temperature measuring element: armored K-type thermocouple(¢0.5mm), -200~1300C, precision 1C |
Power supply: 220V 50Hz |
Test Procedures
The operating procedure for the hot-wire test apparatus includes the following steps:
Checking the instrument: Turn on the power switch and check if the instrument is functioning properly.
Setting the temperature: Adjust the temperature to the required test temperature and wait until the temperature display shows the desired temperature.
Starting the test: Press the start button to begin the test.
Observing the test sample: Observe the residue dropped from the test sample during combustion. Press the stop button immediately when the sample stops burning.
Recording the results: Record the flame height during combustion. At the end of the test, press the exhaust button to remove the smoke.
Cleaning the equipment: Turn off the power switch, remove the test sample, record the test results, clean the dirt inside the chamber, close the exhaust vent, and turn off the main power switch.
These steps ensure the accuracy and safety of the hot-wire test apparatus. Operators should receive regular training to ensure the reliability and comparability of the test results.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Button falling weight impact tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com With the equipment the impact resistance of plastic sew-through flange buttons can be deter... |
 |
Full Face Masks Flame Resistance Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction Fireman fire-protective clothing is mainly composed of jacket and bibcompos... |
 |
Fully programmable walk-in climate simulation system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications High and Low Temperature Humidity Test Chamber is designed for performance an... |
 |
Alternative to PV Friction Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The testing machine can monitor the changes in friction force and the wear condition of the... |
 |
Finger Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Universal Finger Abrasion Tester can simulate virtually all wear processes in... |
