.

Electrical Wire Halogen Gas Emission Test Equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

This apparatus is widely used in laboratories and quality control departments involved in fire safety and material performance evaluation. Typical application scenarios include:

Testing halogen acid gas release characteristics of power cables, control cables, and communication cables

Evaluation of low-smoke halogen-free (LSHF) cable materials

Fire performance assessment of insulation and sheath compounds

Research and compliance testing for cable manufacturing enterprises

Type testing and routine inspection in third-party testing laboratories

Standards

The test apparatus is designed in accordance with the following international and national standards:

(1) GB/T 17650 – Determination of the Total Amount of Halogen Acid Gas Released During Combustion of Electric Cables

(2) IEC 60754-1 – Test on Gases Evolved During Combustion of Materials from Cables – Part 1: Determination of the Amount of Halogen Acid Gas

(3) IEC 60754-2 – Test on Gases Evolved During Combustion of Materials from Cables – Part 2: Determination of Acidity (by pH Measurement) and Conductivity

Parameters

ItemSpecification
Tube Furnace Heating Length 600 mm
Maximum Heating Temperature Up to 950 °C with thermal equilibrium
Temperature Measurement Range 0–1100 °C
Temperature Sensor High-temperature K-type thermocouple
Temperature Accuracy ±0.1 °C
Quartz Tube Heat-resistant quartz, thickness ≥ 2 mm
Carrier Gas Compressed air
Equipment Dimensions 1500 (W) × 450 (D) × 400 (H) mm
Control Cabinet Dimensions 500 (W) × 400 (D) × 250 (H) mm
Power Supply AC 220 V, 16 A
Weight Approx. 80 kg

Accessories

(1) Heat-resistant quartz tube

(2) Ceramic combustion boat

(3) Precision rotameter

(4) Activated carbon filter column

(5) Color-changing silica gel filter column

(6) Glass washing bottles

(7) Beakers and graduated cylinders

(8) Magnetic stirrer

(9) pH meter

(10) Conductivity meter


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Plastic Pipe Hydrostatic Pressure Burst Tester
Plastic Pipe Hydrostatic Pressure Burst Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Plastic Pipe Hydrostatic Pressure Burst Tester utilizes an international airless pressu...
Drying Rate Tester
Drying Rate Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The Drying Rate Tester is designed according to AATCC201 standard req...
Sanitary Napkin Absorption Speed Test chamber
Sanitary Napkin Absorption Speed Test chamber Whats/App: +86 156 1874 6768 Web: standard-groups.com Main uses: The absorption speed tester is used to measure the absorption speed of sanitary...
Carpet Static Load Tester
Carpet Static Load Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Carpet Static Load Tester is a precision instrument designed to simulate the imprints l...
Solar Simulator and Test Bench
Solar Simulator and Test Bench Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com TheSolar Simulator and Test Benchis a high-precision laboratory device design...
Все товары поставщика

Похожие товары

Сварочная проволока из нержавеющей стали с флюсовым сердечником E308T1-1 E308HT1-1 E308LT1-1, газозащитная проволока FCAW для сварки нержавеющей стали марки 304
Сварочная проволока из нержавеющей стали с флюсовым сердечником E308T1-1 E308HT1-1 E308LT1-1, газозащитная проволока FCAW для сварки нержавеющей стали марки 304 Продавец: 863048 Product Description stainless steel flux cored wire E308T1-1 E308HT1-1 E308LT1-1,FCAW stainless ...
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point
E317LT1-1 Flux Cored Wire CO2 Stainless Steel 70% Flux Content 1.0/1.2/1.6mm Diameter OEM Customized 1200C Melting Point Продавец: 863048 Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержание флюса, диаметр 1.0/1.2/...
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding Продавец: Beijing JCZ Technology Co., Ltd The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal Продавец: Beijing JCZ Technology Co., Ltd TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig...
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner Продавец: Beijing JCZ Technology Co., Ltd The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las...