Measuring devices for nanoindentation
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
Measuring hardness and elastic modulus of thin films, coatings, and composite materials
Evaluating microscopic mechanical performance of metals, ceramics, and glass surfaces
Testing wear resistance using nano- and microscratch methods
Analyzing surface performance of MEMS devices and microelectronic materials
Studying adhesion and film-substrate interface bonding of functional coatings
Supporting material development and quality control in industrial and research laboratories
Standards
ISO 14577-1/2/3: Nanohardness and elastic modulus testing of metallic and non-metallic materials
ASTM E2546: Calibration of micro- and nanoindentation instruments
ISO 20502: Nanoscratch testing
ISO 1518: Coating scratch testing
ASTM D7027. D1624. D7187. C171: Scratch testing for coatings and plastics
Technical Specifications
| Module | Parameter | Specification |
|---|---|---|
| Nano Indenter | Max Load | 80 mN / 400 mN / 1800 mN / 4800 mN |
| Min Load | 0.1 mN | |
| Load Resolution | 3 nN | |
| Penetration Depth | 250 μm / 1 mm | |
| Displacement Resolution | 0.0003 nm | |
| Loading Rate | 0.04–12000 mN/min | |
| Nano Scratch | Max Scratch Force | 80 mN / 400 mN / 1800 mN / 4800 mN |
| Scratch Speed | 0.05–600 mm/min | |
| Max Friction Force | 400 mN / 1800 mN | |
| Micro Indenter | Max Load | 40 N / 200 N |
| Min Load | 2 mN / 10 mN | |
| Depth Resolution | 0.01 nm | |
| Penetration Depth | 1 mm | |
| Micro Scratch | Max Load | 40 N / 200 N |
| Max Scratch Length | 50 mm | |
| Max Friction Force | 20 N / 200 N | |
| Precision Positioning Stage | XY Range | 100 mm × 50 mm |
| Z Space | 150 mm | |
| Optical Metallographic Microscope | Magnification | 5X, 10X, 20X, 50X, 1000X (Total 400X–8000X) |
| Atomic Force Microscope (AFM) | Scan Range | 100 μm × 100 μm × 12 μm |
| XY Resolution | 0.1 nm | |
| Z Resolution | 0.02 nm | |
| General | Thermal Drift | <0.05 nm/s (compensated <1 nm) |
| Displacement Accuracy | Grating positioning ≤250 nm | |
| Max Indentation Depth | 1 mm | |
| Max Friction Force | 400 N | |
| Power Supply | AC 220V / 50Hz |
Accessories
| No. | Accessory / Consumable | Quantity | Note |
|---|---|---|---|
| 1 | Diamond Indenter Tip | 1 | R-shaped tip, compatible with nano & micro modules |
| 2 | Diamond Scratch Tip | 1 | For nano/micro scratch tests |
| 3 | Constant Load Weights | Several | For micro/high-load calibration |
| 4 | Sample Fixture | 1 set | Fits various sample sizes |
| 5 | Optical Microscope Module | 1 set | For scratch imaging |
| 6 | AFM Probe | 1 set | High-resolution surface scanning |
| 7 | Power Cord | 1 set | AC 220V / 50Hz |
| 8 | Safety Cover | 1 | Provides operational protection |
| 9 | Software Installation Disk | 1 set | For data analysis |
| 10 | Tools & Manual | 1 set | Installation and operation guidance |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Walk-in High Temperature Aging Test Room ,Walk in High Temperature Environmental Test Chamber | TheHigh-Temperature Aging Chamberis designed to simulate high-temperature and harsh environmental conditions for high-performance electronic produc... |
 |
Vertical Fire Resistance Test Furnace for Building Elements，ISO 834 wall fire resistance testing furnace system | The Vertical Fire Resistance Test Furnace for Building Elements is designed for fire resistance testing of vertical building components, including ... |
 |
Intramedullary Nails Internal-fixation Pull-out Force Tester | Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—Pa... |
 |
Resistance to flame propagation tester,ECE R118 Annex 10 | Introduction This equipment is designed and manufactured according to ECE R118 Annex 10. This model is intelligent, with PLC and touch screen inte... |
 |
Contact heat resistance tester | The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time required for speci... |
Похожие товары
 |
High speed reciprocating friction wear tester | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester for... |
 |
Custom fully automatic falling sand abrasion tester | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester to ... |
|
|
Measuring devices for nanoindentation | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Measuring hardness and elas... |
 |
Multi function Vacuum Tribometer | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is designed for ... |
 |
Custom low-load wear testing instrument | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Low-Load Wear Testing Ma... |
