Glove Thermal Insulation Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The tester complies with and supports testing according to:
BS 6526:2002 – Household Oven Gloves Specification and Test Methods
ISO 12127 – Protective Gloves for Thermal Hazards (Reference Method)
EN 407 – Protective Gloves Against Thermal Risks
ASTM F1060 – Standard Test Method for Thermal Insulation of Materials
ISO 188 – Rubber, Vulcanized or Thermoplastic – Accelerated Ageing and Heat Resistance
Parameters
| Parameter | Specification |
|---|---|
| Sample Size | Diameter 70 mm |
| Temperature Range | Room Temp +5°C to 180°C |
| Temperature Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Polyethylene Sample Mounting Plate | 120 × 120 × 25 mm |
| Mounting Plate Sensor Range | 0–260°C, ±0.1% |
| Heating Block Sensor Range | 0–260°C, ±0.1% |
| Brass Cylinder Weight | 3000 ±10 g |
| Brass Cylinder Dimensions | Small end Φ32 ±0.02 mm H20 ±0.05 mm; Large end Φ76 ±0.02 mm H74 ±0.05 mm |
| Sensor Detection Point | 2.5 mm ±0.05 mm from cylinder base |
| Cylinder Drop Speed | 25 mm/s (adjustable 1–60 mm/s) |
| Cylinder Return Speed | 25 mm/s (adjustable 1–60 mm/s) |
| Distance from Cylinder to Sample | 100 mm ±0.5 mm |
| Polyethylene Protective Plate | 200 × 250 × 15 mm |
| Protective Plate Distance to Sample Surface | 50 mm |
| Protective Plate Movement Speed | 80 mm/s |
| Time Measurement Range | 0–99999.9 s |
| Power Supply | AC 220V, 50Hz |
| Dimensions (L×W×H) | 540 × 380 × 500 mm |
| Total Weight | 40 kg |
Features
Color touchscreen with Chinese/English interface and menu-driven operation
Core control via STMicroelectronics 32-bit multifunction mainboard with 16-bit high-precision AD temperature acquisition
Servo motor and servo controller for precise motion control
Real-time data display on connected PC, with automatic curve plotting
Automatic generation of test reports
Brass cylinder drops under gravity for controlled contact
Automatic cylinder return mechanism
Automatic movement and return of thermal protective plate
High-precision Omega sensors and transmitters for accurate temperature measurement
Test Procedures
Preparation
Sample Preparation: Fix the glove onto the test fixture, ensuring the sample diameter meets the standard (typically 70 mm).
Equipment Check: Verify power supply, sensors, and heating elements are functioning properly.
Operation
Place Sample: Position the glove on the polyethylene mounting plate equipped with thermocouples connected to the temperature recording device.
Heating Test: Lower the preheated brass cylinder onto the sample and measure the temperature rise over a set duration.
Record Data: Monitor and record the glove’s internal temperature in real-time to calculate thermal insulation performance.
Precautions
Safety: Ensure operators maintain a safe distance from high-temperature components to prevent burns.
Equipment Maintenance: Regularly inspect sensors and heating devices to maintain test accuracy and reliability.
Maintenance Information
Clean thermocouples, sensors, and brass surfaces regularly to prevent measurement errors.
Inspect servo motors and moving parts monthly for smooth operation.
Verify calibration of sensors periodically to ensure accurate temperature readings.
Check the HMI and PC interface functionality to maintain data integrity.
Ensure protective plates and cylinders move freely without obstruction.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Thermal Insulation Rock Wool Thermal Load Test Device | Whats/App: +86 156 1874 6768 Web: standard-groups.com The thermal insulation rock wool thermal load test device is a test device developed accord... |
 |
Affordable flame spread testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Flame Spread Calorimeter is suitable for: Building materials: Evaluate fl... |
 |
Injection device slide tester for plunger | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for evaluating the sliding performance of various medi... |
 |
Walk-in Constant Temperature and Humidity Test Chamber,Walk in Chamber Temperature Aging Room | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Walk-in Constant Temperature and Humidity Test Chamber is suitable for co... |
 |
Wholesale Fabric Thermal Cooling Sensation Tester OEM Manufacturer China Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Fabric Cooling Sensation Tester is used to evaluate the instant... |
