Industrial impact testing equipment supplier
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The system supports compliance with international and automotive material standards:
ISO 6272‑1:2011 – Paints and varnishes – Impact resistance tests – Part 1: Large-area falling-weight test.
ISO 6272‑2:2011 – Paints and varnishes – Impact resistance tests – Part 2: Small-area falling-weight test.
ASTM D2794‑04(2022) – Standard test method for resistance of coatings to impact.
ASTM D5420‑21 – Test method for rigid plastic impact performance (falling-weight method).
GB/T 14123‑2012 – Mechanical impact testing machine performance characteristics.
GB/T 20624.1‑2006 – Paints and varnishes – Large-area falling-weight impact test.
GB/T 20624.2‑2006 – Paints and varnishes – Small-area falling-weight impact test.
ISO 20567‑1 – Road vehicles – Automotive materials resistance to stone-chip impact.
SAE J400 Series – Impact testing and material performance standards.
ASTM D3170 – Stone-chip impact performance test method.
GMW14668‑3.4.9 – GM stone-chip impact requirements.
Parameters
| Parameter Category | Details |
|---|---|
| Impact Device Dimensions | 270 × 600 × 200 mm (W × H × D) |
| Impact Device Weight | 10 kg |
| Impact Energy | 3 – 140 J (at 6 bar maximum) |
| Energy Adjustment | Via controller, adjustable within range |
| Data Sampling Rate | 50 kHz |
| Display | 4.3" touch screen, 480 × 272 pixels |
| Data Storage | SD card |
Features
Specifically designed for aerospace and railway material testing.
Generates impact using compressed air at controlled energy levels.
Multiple impact heads available with varying weight and tip type.
Impact energy adjustable from 3 to 140 joules using the controller.
Built-in touchscreen displays test analysis in real time.
Test data recorded at 50 kHz for accurate distance, velocity, and acceleration measurements.
Data is stored on an SD card for easy retrieval and analysis.
Compact impactor size for flexibility: 270 × 600 × 200 mm.
Maximum impact energy: 140 J at 6 bar.
Accessories
Interchangeable impact heads (different weights and tips)
Compressed air supply system
4.3-inch touchscreen controller
SD card for data storage
Sample mounting fixture
Safety shields and enclosure
Test Procedures
Ensure the testing area is clear and compressed air supply is connected.
Mount the material sample on the fixture according to standard dimensions.
Select the appropriate impact head and adjust the compressed air pressure to achieve the desired energy (3–140 J).
Set the sampling rate and display parameters on the touchscreen controller.
Activate the impact test and monitor the material response on the touchscreen in real time.
Record distance, velocity, acceleration, and impact results to the SD card.
Repeat for multiple samples or energy levels as required by standards.
After testing, safely remove samples and store data for analysis.
Maintenance Information
Inspect impact heads, sample fixtures, and air connections regularly.
Calibrate pressure and energy settings periodically to ensure accuracy.
Clean the impact device and enclosure to remove debris or coating residues.
Replace worn or damaged impact tips to maintain testing consistency.
Verify data recording and touchscreen functionality before each test session.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Photovoltaic module damp heat test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical a... |
 |
Syringe Sealing Positive Pressure Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for evaluating a wide range of medical devices with Lu... |
 |
ISO Standard Dual Station Crocking Tester | Automatic Color Transfer Testing Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Parameters ParameterSpecification Test Stations Dual station ... |
 |
Spinal Internal Fixation System Component Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixatio... |
 |
High and Low Temperature Humidity Test Chamber,IEC 62660 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications High and Low Temperature Humidity Test Chamber is designed for performance an... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
