Affordable Cable Fireproof Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The apparatus is designed to comply with and support the following standards:
GB/T 19216-2008 — Test methods for cable or optical fiber circuit integrity under flame conditions
GB/T 19666-2019 — General requirements for flame-retardant and fire-resistant wires and cables
IEC 60331-2009 — Tests on electric cables under fire conditions
BS 6387 — Performance requirements for maintaining circuit integrity of cables under fire conditions
BS 8491 — Assessment methods for fire-resistance of cables
Technical Specifications
| Item | Technical Specification |
|---|---|
| Test Station | Single station (one sample at a time) |
| Sample Length | ≥1200 mm |
| Burner Type | Ribbon propane burner with Venturi mixer |
| Burner Nominal Length | 500 mm |
| Gas Flow Rate | 0–50 L/min (adjustable) |
| Gas Flow Accuracy | ±0.1 L/min |
| Air Flow Rate | 0–200 L/min (adjustable) |
| Air Flow Accuracy | ±5 L/min |
| Flame Temperature Range | 450–950 °C (adjustable) |
| Temperature Sensors | K-type stainless steel thermocouples ×2 |
| Thermocouple Max Temperature | ≤1100 °C |
| Control Method | PLC + touchscreen operation |
| Power Consumption | 3 kW |
| Power Supply | AC 380 V ±10%, 50 Hz, three-phase five-wire |
| Gas Supply | Propane / LPG + compressed air |
Product Features
Mass flow controllers enable high-precision closed-loop control of gas and air flow.
Wide flame temperature adjustment range meets different fire-resistance test requirements.
Circuit integrity detection via breaker replaces traditional fuse structures, improving maintenance efficiency.
Continuous live monitoring system detects open or short circuits in real-time.
Side-mounted exhaust system ensures stable oxygen levels during combustion.
PLC + touchscreen control allows intuitive parameter settings and excellent test repeatability.
Compatible with multiple fire-resistance test modes, including water-spray fire-resistance and mechanical impact tests.
Accessories and Consumables
| Category | Name | Description |
|---|---|---|
| Standard Configuration | Tubular gas burner | Suitable for fire-resistance and water-spray fire tests |
| Mass flow controller | Precision control of gas and air | |
| K-type thermocouple | Temperature monitoring | |
| Continuous monitoring device | Includes transformer and indicator lights | |
| Exhaust assembly | Rapid exhaust of combustion gases | |
| Optional | Water-spray fire device | Complies with BS 6387 W-class |
| Mechanical impact device | Complies with BS 6387 Z-class | |
| Consumables | Gas | Propane or LPG |
| Test cable | Test specimen | |
| Seals | Periodic replacement required |
Testing Principle
During the test, the mass flow controller precisely adjusts the gas-to-air ratio, producing a stable and controllable high-temperature flame. The test cable is subjected to continuous flame while all cores are energized at rated voltage and a load current close to 0.1 A.
A continuous monitoring system observes the circuit status in real-time. Any short-circuit or open-circuit condition triggers an immediate signal, allowing evaluation of whether the sample maintains circuit integrity under the specified flame and loading conditions.
Operation Instructions
Ensure all gas lines, air lines, and exhaust systems are properly connected before testing.
Set the gas flow, air flow, and test duration according to the relevant standard.
Activate the exhaust system before ignition to ensure combustion gases are removed.
Do not open the test chamber door during testing.
For water-spray or water-jet fire tests, calibrate the flow meters and verify the tray setup before ignition.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Chest Drainage Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The thoracic drainage tester is widely applied in the medical field, mainly used for monito... |
 |
Puncture Strength Tester STD - NDG5，ISO 13934 fabric puncture force measurement device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile... |
 |
Qinsun Xenotest 220 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 105-B02: Lightfastness testing for colored textiles. AATCC TM16 (Option 3):... |
 |
Aluminum Foil Pinhole Detector for lab use | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards - YBB00152002 - 2015 Pharmaceutical Aluminum Foil - GB/T 3198 - 2010 Aluminum a... |
 |
Diaper impurity testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers... |
