Multi-function surface performance test system
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
GB/T 9279-2007 Paints and Varnishes — Cross-Cut Test
JIS K 7125 Plastics — Tribological Test Methods
JIS K 5600 Testing Methods for Paints and Varnishes (including scratch, abrasion, and adhesion tests)
JIS L 0823 Test Methods for Abrasion Resistance of Plastic Films and Sheets
JIS P 8139 Determination of Friction and Wear Properties of Coatings
JIS P 8147 Determination of Surface Friction Coefficient and Scratch Properties of Coatings
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
Parameters
| Parameter Category | Specification |
|---|---|
| Sliding speed | 5 – 6000 mm/min |
| Drive motor | AC servo motor |
| Drive mechanism | Gear and rack transmission |
| Sliding distance | 1 – 100 mm |
| Motion mode | Single mode: stops automatically after preset distance |
| Reciprocating mode: preset distance, up to 99.999.999 cycles | |
| Measurement range | 10 – 100 gf or 0 – 2000 gf |
| Worktable size | 240 × 120 mm |
| Safety system | Overload protection (OVERLOAD) |
| Noise suppression | High-frequency noise suppression circuit |
| Zero adjustment | Digital servo automatic zeroing |
| Output (non-linearity) | 0 – 5 V (within 0.05% FS) |
| Sensitivity switching | 0 / 10 / 25 / 50 / 100% FS |
| Dynamic strain amplifier | S/N ratio: 60 dB (maximum sensitivity) |
| Frequency response | 2 kHz / −3 dB |
| Filter | 1 / 10 / 100 Hz low-pass filter |
| Operating environment | 0 – 50 °C, ≤85% RH, non-condensing |
| Power supply | AC 100 V, 50/60 Hz |
| Main unit dimensions | W 630 × D 350 × H 580 mm |
Features
Linear motion driven by a servo motor ensures stable and precise friction testing
Balanced mechanical arm structure minimizes the influence of adapter weight on vertical load
Direct transmission of friction force to the load sensor improves measurement accuracy
Supports a wide range of test heads and accessories for versatile surface performance evaluation
Touchscreen interface enables intuitive operation and real-time data display
Capable of testing under special environments, including lubricated, heated, or cooled conditions
Accessories
(1) Scratch needle
(2) Ball indenter
(3) Rod gauge
(4) Set of calibration weights
(5) Power cable (with 2P/E, 2 m)
(6) Accessory cover
(7) Tool set
(8) Parts box
(9) Operating manual
Optional: friction and wear analysis software, various test heads, heating plate, Y-axis moving stage
Test Procedures
Fix the test specimen securely on the worktable.
Select and install the appropriate test head according to the test method.
Set test parameters such as speed, sliding distance, load, and motion mode.
Adjust environmental conditions if required (oil, heating, or cooling).
Start the test and monitor friction force and surface behavior in real time.
Complete the test automatically or manually after the preset conditions are met.
Analyze test results based on the applicable standard and test objective.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Spinal Internal Fixation Components System Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0961-2014 (China): Specifies static/fatigue testing protocols for spinal fix... |
 |
Advanced Multi-Axis Tribometer for Tribology Laboratory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Multi-Axis Tribometer is a versatile tribological testing device for stud... |
 |
ISO 5660 Cone Calorimeter Fire Test Equipment Supplier Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Ignition System 10 kV spark igniter with fire-off safety system; p... |
 |
Multi-Function Friction and Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Multi-Function Friction and Wear Tester is a highly configurable tribological testing syste... |
 |
Fireproof coatings tester chamber method | Whats/App: +86 156 1874 6768 Web: standard-groups.com The fire-retardant coating tester (combustion chamber method) is primarily used to test the... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
