Research Laboratory High-Temperature Tribometer G1000
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960 Metallic Materials – Friction and Wear Test Method
GB/T 12444 Metallic Materials – General Principles of Wear Testing
GB/T 13678 Metallic Materials – Friction and Wear Performance Test Method
ASTM G99 Pin-on-Disk Friction and Wear Test
ASTM G133 Linear Reciprocating Friction and Wear Test
ISO 7148 Sliding Bearing and Bearing Material Friction and Wear Test
DIN 50324 Material Tribology Performance Test
Parameters
| Parameter | Specification |
|---|---|
| Test Load Range | 150–2000 g (weight loading) |
| Friction Pair Type | Pin-Disk, Ball-Disk |
| Sample Table Speed | 5–2800 r/min, continuously adjustable |
| Friction Mode | Rotational friction |
| High-Temperature Furnace Range | Room temperature – 1000 °C |
| Temperature Measurement Accuracy | 0.2% F.S |
| Friction Coefficient Accuracy | 0.2% F.S |
| Friction Force Accuracy | ±0.002 N |
| Atmosphere | N₂, CO₂, He, Ar (inert gases) |
| Control Method | Computer automatic control |
| Data Acquisition | Real-time friction force, coefficient, and temperature data storage |
Features
Wide temperature range from room temperature to 1000 °C for high-temperature tribology research.
Integrated high-temperature furnace and friction system for stable operation.
Supports various inert gas atmospheres to simulate controlled environmental conditions.
Real-time display of friction force and coefficient for process analysis.
High precision load and speed control with excellent repeatability.
Automatic stop protection ensures safe high-temperature testing.
Accessories
| Accessory | Specification / Use |
|---|---|
| High-Temperature Furnace | Up to 1000 °C |
| Friction Test Pins | Spherical, pin-shaped; multiple materials available |
| Sample Disk | Standard disk holder for specimen mounting |
| Weight Set | Various levels for load application |
| Temperature Sensor | High-temperature thermocouple |
| Atmosphere Interface | Inert gas supply device |
| Computer & Control Software | Data acquisition and analysis |
| Protective Components | High-temperature shields and insulation |
Test Principle
The specimen is mounted on the sample disk inside the high-temperature furnace. The furnace heats the specimen to the set temperature. The loading system applies a defined load to the friction pair while driving the sample disk to rotate, creating stable contact between the counterbody (ball or pin) and the specimen surface. The sensor system records friction force and coefficient in real-time, while temperature is simultaneously monitored, enabling quantitative analysis of material friction and wear behavior under high-temperature conditions.
Operation Instructions
Confirm specimen can withstand high temperatures to avoid damage.
Set load, rotational speed, temperature, and atmosphere according to the relevant standard.
Avoid direct contact with the furnace or hot specimens.
Ensure gas purity and stable flow when introducing inert atmospheres.
Allow furnace to cool to a safe temperature before removing specimens.
Experimental Flow
Prepare and clean specimens and counterbodies per relevant standards.
Install specimens and friction pairs, ensure coaxial alignment.
Set test load, speed, temperature, and atmosphere conditions.
Heat furnace to the target temperature and maintain thermal stability.
Perform friction test, recording data in real-time.
Upon test completion, the system automatically stops; save and export data.
Analyze wear surfaces and quantify wear amount.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Drawer slide durability meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction Drawer slides are fundamental components in furniture, cabinetry, and... |
 |
Metal ring friction and wear testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Evaluate the wear resistance of the material: By simulating the friction process, real-tim... |
 |
Luggage rod reciprocating fatigue testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In th... |
 |
Fully Automatic Falling Sand Abrasion Test Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YS/T 1186-2017: Falling Sand Tester Type B for Anodized Aluminum and Organic Pol... |
 |
Bone connector torque analyzer for manufacturers | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Bone Screws Torque Tester is a precision testing device designed to evaluate the ... |
