Compact Benchtop Friction and Wear Test Equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The tester is designed to support test methods referenced in the following standards:

ASTM G99 (Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus)

ISO 20808 (Fine ceramics — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disk method)

GB/T 3142 (Determination of load-carrying capacity of lubricants — Four-ball method)

SH/T 0189 (Test method for anti-wear properties of lubricating oils — Four-ball method)

Parameters

Item	Description
Platform	Open-platform design for easy access and operation
Interchangeable Test Modules	Quickly replaceable modules enabling multiple tests on the same platform (rotational, reciprocating, etc.)
Force Sensors	High-resolution force sensors with multiple measurement ranges; maximum load up to 200 N
XY Stage	High-precision automated XY platform with automatic test radius adjustment; supports integration of 3D optical surface profiling
Maximum Temperature	Up to 1000 °C
XY Travel Range	150 mm × 150 mm

Features

Standard test configurations including ball-on-disk (pin-on-disk) and high-speed reciprocating motion

Loading range from mN up to 200 N, suitable for micro- to macro-scale tribological testing

Integrated 3D optical surface profiling capability

Closed-loop servo loading control for stable and repeatable measurements

High-temperature testing capability up to 1000 °C

Support for rotational, reciprocating, and ring-on-block test modes

Modular design with fast replacement of test modules

Fully automated XY positioning platform (150 mm × 150 mm)

Accessories

Ball-on-disk / pin-on-disk test module

High-speed reciprocating test module

Ring-on-block test module

Interchangeable force sensors

3D optical surface profiling module

Test Procedures

Select and install the appropriate test module according to the test requirement.

Mount the specimen and counter body securely on the test platform.

Set test parameters including load, speed, motion type, temperature, and test radius.

Perform system checks and sensor verification prior to testing.

Start the automated test sequence and monitor friction and load signals.

Complete the test based on predefined conditions or test duration.

Conduct surface morphology measurement and export test data for analysis.

Maintenance Information

Clean test modules, fixtures, and contact components after each test.

Regularly inspect and calibrate force sensors to maintain measurement accuracy.

Check mechanical components and motion stages periodically for smooth operation.

Maintain environmental and heating components according to usage conditions.

Другие товары поставщика

	Rubber non-rotor vulcanization Tester	The Rubber Non-Rotor Vulcanization Tester is a precision instrument designed for the rubber processing industry to monitor and control rubber mater...
	4000 Hours Test Kit For Xenon light WeatherOmeeter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction 4 thousand hours xenon lamp tester spare package, allows your device has a lon...
	Medical glove water-impermeability tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The impermeability tester for medical gloves is mainly used to determine the ...
	Spinal Internal Fixation System Component Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixatio...
	Battery Powder resistivity meter丨Battery Powder resistivity Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YS/T 587.6-2006 GB/T 24525-2009 GBT 30835-2014 Product Advantages Unmatche...

Все товары поставщика

Похожие товары

	Metal Angular Fixator Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine...
	Bone Plate Four-Point Bending Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue...
	Bone Plates Static Four - point Bending Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending...
	Spinal Internal Fixation System Assembly Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem...
	Spinal Internal Fixation System Component Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo...