Safety Helmet Roll-off Testing Equipment
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The safety helmet retention test equipment is a device used to evaluate the stability of a helmet's fit when subjected to impact. By simulating the pulling forces and impact scenarios of an accident, it accurately assesses the reliability of the helmet's retention system, providing a rigorous technical safeguard for the safety of cyclists. The equipment mainly consists of a simulated head form, a tensile loading system, an impact track, and a data acquisition system. During the test, the helmet is secured to the simulated head form according to standard wearing procedures, and the length of the helmet straps and the tightness of the buckles are adjusted to ensure a fit that matches actual wearing conditions.
Application
Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.
Standard
(1)IS 4151:Indian Standard for Protective Helmets
(2)ECE R22.05:Uniform Provisions Concerning the Approval of Protective Helmets and Their Visors for Drivers and Passengers of Motor Cycles and Mopeds
Feature
(1)Dynamic Tensile Testing: A tensile force is applied to the helmet using a tensile loading system, and the maximum tensile force is recorded to ensure the helmet does not detach during the test.
(2)Impact Testing: The helmet is worn and slid down a track to impact a rigid obstacle at a specific speed, and whether the helmet detaches is recorded.
(3)Data Acquisition: An accelerometer records the impact force on the headform, comprehensively evaluating the stability of the fastening system under dynamic impact.
(4)Safety Protection: The equipment is equipped with a safety enclosure to prevent injury from flying helmet fragments during testing.
Parameters
| Item | Detail |
|---|---|
| Mass of initial load | 3 kg ± 0.1 kg |
| Mass of falling weight | 10 kg ± 0.01 kg |
| Lowering height | 0.5 meters ± 0.01 meters |
| Measuring method | manual |
| Electricity | 220V 50HZ |
| Test theory | vertical descent |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fabric Wrinkle Bending Tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the w... |
 |
Filter Media Tester G505 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Filter Media Dynamic Filtration Performance Tester is primarily used to assess... |
 |
Pensky-Martens Closed Cup Flash Tester ASTM | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The flash point is key for classifying flammable liquids, crucial for safety in tr... |
 |
Heel Fatigue Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Heel Impact testeris used to determine impact strength of heels of ladies' shoe to... |
 |
Comprehensive Engine Oil Filter Test Bench| Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The latest G506 mask automatic filter performance tester uses the most advanced te... |
