Multi-Station Hip Joint Simulator
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Multi-Station Hip Joint Simulator is a specialized tribological testing device designed to simulate friction and wear behavior of artificial hip joints under physiological gait conditions. Driven by motors and servo-pneumatic loading systems, it reproduces anatomically realistic motions of the femoral head against the acetabular cup with dynamic bi-axial loading. The simulator supports multiple stations running in parallel, providing a cost-effective solution for long-term wear testing, research, and quality evaluation of hip implants.
Application
You can use this simulator for:
In vitro wear simulation of total or partial hip joints.
Evaluating wear performance of femoral head and acetabular cup material pairings.
Studying metal–polymer, ceramic–ceramic, and ceramic–polymer bearing combinations.
Investigating long-term wear and failure mechanisms of artificial joints.
Comparative testing during medical device R&D.
Type testing and consistency verification of hip joint products.
Biotribology research at universities and research institutes.
Regulatory testing, product registration, and quality control of artificial hip joints.
Standards
ASTM F732 – Reciprocating Pin-on-Plate Wear Test (applied to joint simulators).
Parameters
| Parameter | Specification |
|---|---|
| Test Configuration | Acetabular Cup / Femoral Head |
| Number of Stations | 6 or 12 |
| Test Frequency | 1.06 Hz (50 Hz power) / 1.27 Hz (60 Hz power) |
| Maximum Load | 3 kN (6 stations) / 2 kN (12 stations) |
| Minimum Load | 0.4 kN |
| Average Load | 1.2 kN |
| Load Form | Double-peak dynamic load |
| Flexion-Extension (FE) | 46° |
| Abduction-Adduction (AA) | 12° |
| Force Trajectory Shape | Elliptical |
| Force Trajectory Ratio | 3.8 |
| Trajectory Length | 1.73 × r (r = femoral head radius) |
| Drive | Motor + Mechanical Crank |
| Motor Power | 370 W |
| Lubricant Volume | 500 ml |
| Controlled Parameters | Load, cycle number |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Dry Cleaning & Washing Cylinder | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Dry Cleaning & Washing Cylinder is a precision instrument designed with a ... |
 |
Cone calorimetric test equipment - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Heat release is the core measurement parameter for ... |
 |
Filter Dynamic Cycling Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter element dynamic cycling test bench is mainly used to test the chemical elem... |
 |
Small Solar Simulator | Get a quote： Web: qinsun-lab.com Email：info@qinsun-lab。com TheSmall Solar Simulatoris a precision laboratory device designed for the controlled ... |
 |
Diaper Anti-Side Leakage Performance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure ... |
Похожие товары
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
