Photovoltaic module damp heat test chamber
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical aging conditions for photovoltaic modules and related electronics. By combining high temperature and high humidity control, the system enables accelerated evaluation of module reliability, encapsulant degradation, and potential PID (Potential Induced Degradation) effects. It is suitable for R&D laboratories, quality assurance, and certification testing in compliance with international standards.
Application
Accelerated aging tests of photovoltaic modules under high temperature and humidity.
Evaluation of PID resistance and encapsulant performance.
Reliability testing of batteries, PV modules, and electronic assemblies in wet and humid conditions.
Indoor certification and R&D testing for IEC/UL compliance.
Standards
(1)IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2)UL 1073: Standard for Safety for Enclosures for Electrical Equipment
(3)ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
(4)CE Certification (Conformité Européenne)
Features
(1)Extreme Environmental Simulation: 85°C ±2°C / 85% RH control replicates 10+ years of tropical aging in 1.000 hours.
(2)Ultra-Stable Performance: ±1°C temperature stability and ≤2°C uniformity for consistent long-term testing.
(3)Energy Efficiency: Advanced insulation and heat recovery reduce power consumption by 40%; ECO mode for auto power-down during stabilization.
(4)Safety First: Dual overload protection with thermal cutout and door interlock system.
(5)Smart Diagnostics: AI-powered degradation prediction using IV curve shifts and EL imaging data; remote monitoring via 4G/LTE.
(6)Flexible Operation: Dual-chamber design enables simultaneous wet/dry testing; modular expansion up to 1.500 L for full-size PV arrays.
(7)User-Friendly Interface: 10” touchscreen HMI with preloaded IEC/UL test profiles and automated condensation drainage.
(8)Glovebox Compatibility: Oxygen/moisture controlled operation for sensitive electronics.
Parameters
| Parameter | Specification |
|---|---|
| Temperature Range | 30°C to 85°C (operational) |
| Temperature Stability | ±1°C (at 85°C setpoint) |
| Temperature Uniformity | ≤±2°C (empty chamber) |
| Humidity Range | 30%–95% RH (non-condensing) |
| Humidity Stability | ±2.5% RH (at 85% RH) |
| Chamber Volume | 500 L (standard), expandable to 1.500 L |
| Power Supply | 380V/415V, 3-phase, 50/60Hz |
| Dimensions (W×D×H) | 1.200 mm × 1.800 mm × 2.000 mm |
| Weight | 800 kg (net) / 1.200 kg (gross) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Xenon Test Chamber/weather ometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This in... |
 |
Custom Syringe needle flow tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for a wide range of medical devices, including: (1) D... |
 |
Car seat headrest insertion and withdrawal force durability tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Car Seat Headrest Insertion and Withdrawal Force Durability Tester is a specialized tes... |
 |
Advanced Car Wire Scratch Durability Equipment | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Scratch Resistance Tester is designed to evaluate the abr... |
 |
Surface Water Absorption Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fabric Water Absorption Tester is designed to test the ability of terry fabri... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
