Portable radiant protective performance tester
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Thermal protective clothing and some fire-retardant properties of the material refers that human body carry out security protection who work under high temperature conditions,so as to avoid the human body's high temperature injury. In theory, there are three forms of heat damage to the human body:
thermal convection; B. heat transfer; C. thermal radiation;
In general, the practical application is more than the above two or three kinds of mixing effect. So the thermal protection should be used for different purposes and use of the environment to highlight its certain thermal protection performance.
I. Thermal Radiation Protection Performance Test Method (RPP Test) Radiant Protective Performance;
II. Thermal Radiation and Heat Convection Mixing Protective Performance Test Method (TPP Test) Thermal Protective Performance;
The RPP test is mainly used to determine the radiant thermal protection performance of thermal protective clothing. Since thermal radiation is one of the main heat transfer forms that cause thermal damage. The method can better test and evaluate the thermal protection performance of thermal protective clothing from one aspect, and has been widely used in the field of forest fire.
Application
Outdoor Sports Gear: Evaluating the waterproof breathability and thermal balance of fabrics for jackets, ski suits, and mountaineering apparel.
Specialized Protective Clothing: Testing thermal protection and moisture-wicking performance of firefighting suits, military combat uniforms, and medical protective garments.
High-Performance Fabrics: Evaluating multilayer composite materials for extreme environments like spacesuits and deep-sea diving suits.
Bedding & Interiors: Monitoring thermal resistance properties of sleeping bags, carpets, and automotive seat materials to enhance comfort at home and on the go.
Membrane Material Research: Assisting R&D personnel in testing technical specifications of moisture-permeable components like microporous membranes and non-porous hydrophilic films.
Standards
NFPA 1971：Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
NFPA 2112：Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
BS EN ISO 6942：Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
EN 366：Protective clothing — Protection against heat and fire — Method of test: Determination of resistance to molten metal splash
ASTM F2702：Standard Test Method for Determining the Heat Transfer Through Materials Used in Protective Clothing Using a Hot Surface
ASTM F1939：Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials With Continuous Heating
Feature
◆Evaluation of flame retardant properties of flame retardant materials
◆Detect abnormalities and reduce accidents
◆Calculate the RPP value
◆Evaluate thermal protection performance
◆Improve job safety
◆Improve the quality control system
Technical Parameters
| Items | Parameters |
| Heating power | 6.5Kw/220V/50Hz |
| Heating length | 178mm, diameter 8mm |
| Heat flux density | 10Kw/m2-80Kw/m2 |
| Radiation source temperature control | －1200℃±5℃ |
| Thermal radiation source temperature sensor | Thermocouple (0 ℃ -1600 ℃) |
| Calorimeter heat capacity | 480.937J/K |
| Heating area | 50mm2×50mm2 |
| Calorimeter temperature range | －80℃ |
| Test environment |
Between 15 ℃ -35 ℃ ,the room without air circulation |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Absorbable Bone - connecting Plates Four - point Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Absorbable Bone-connecting Plates Four-point Bending Tester is a specialized testing ma... |
 |
Catheter Power Injection Flow and Pressure Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Power Injection Flow and Pressure Tester is designed to evaluate the flow an... |
 |
Building Material Fire Endurance Test Furnace OEM Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features The furnace incorporates advanced design and control technology to ... |
 |
walk-in constant temperature and humidity test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Walk-in Constant Temperature and Humidity Test Chamber is suitable for co... |
 |
Computer-Controlled Intervertebral Fusion Cage Shear Fatigue Testing System | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 0959-2014 (China): Specifies shear fatigue testing protocols ... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
