Horizontal Fire Resistance Test Furnace for Building Elements | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Horizontal Fire Resistance Test Furnace for Building Elements is designed for fire resistance testing of horizontal building components under controlled thermal exposure. Manufactured in accordance with GB/T 9978.1-2008. this furnace provides stable and uniform fire conditions to evaluate the fire resistance performance of load-bearing and non-load-bearing horizontal structural elements.
The system simulates standard fire curves and records temperature, pressure, and combustion behavior throughout the test, making it suitable for laboratories involved in building fire safety evaluation, material certification, and structural fire performance research.
Application
Building Fire Resistance Testing
Fire resistance evaluation of horizontal structural elements such as floors, slabs, roofs, and horizontal partitions.
Structural Engineering and Construction Materials
Testing of concrete slabs, steel floor systems, composite structures, and protected steel assemblies under standard fire exposure.
Fire Protection Materials
Performance testing of fireproof coatings and fire-resistant treatments applied to horizontal load-bearing components.
Fire Safety Research and Certification
Fire endurance testing to support compliance verification, safety assessment, and technical research.
Standards
The furnace complies with the following standards:
(1) GB/T 9978.1-2008 – Fire Resistance Tests — Elements of Building Construction — Part 1: General Requirements
(2) ISO 834-1 – Fire Resistance Tests — Elements of Building Construction — Part 1: General Requirements
(3) GB/T 9978.3-2008 – Fire Resistance Tests — Elements of Building Construction — Part 3: Commentary on Test Methods and Test Data Application
(4) GB/T 9978.5-2008 – Fire Resistance Tests — Elements of Building Construction — Part 5: Specific Requirements for Loadbearing Horizontal Separating Elements
(5) GB/T 14907-2018 – Test Standard for Fire Protective Coatings for Steel Structures
Parameters
| Item | Specification |
|---|---|
| Number of Burners | 12 proportional flat-flame burners (6 on each side, 5 m furnace length) |
| Operating Temperature | Maximum test temperature 1250 °C |
| Design Temperature | 1350 °C |
| Combustion Mode | Low-speed proportional flat-flame diffusion combustion |
| Gas & Air Pressure | ≤ 4000 Pa |
| Flame Length | ≤ 500 mm |
| Furnace Temperature Measurement Points | 9 points |
| Thermocouple Sleeve Extension | ≥ 25 mm |
| Temperature Accuracy | < ±15 °C |
| Furnace Pressure Measurement | T-type probes, accuracy ±2 Pa, 3 points |
| Data Acquisition Rate | 3 times per second |
| Fuel Gas | Liquefied petroleum gas |
| Equipment Dimensions | 8 m (W) × 8 m (L) × 2.5 m (H) |
| Power Supply | AC 380 V, 70 kW |
| Equipment Weight | Approx. 5 t |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Smoke toxicity test equipment for building materials | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Smoke Toxicity Tester Flammability Analyzer for Building Material DIN 53436 is des... |
 |
Cantilever Fabric Stiffness Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Standard ZB WO4003. GB/T18318. ASTM D 1388. IS0907... |
 |
Catheter Balloon Inflation Diameter Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The catheter cuff inflated diameter tester is mainly used to measure the diameter ... |
 |
S80 Carbon Arc Weathering Tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com S80 Carbon Arc Weathering Tester utilizes eight sunlight carbon arc lamps capable ... |
 |
Twist Compression Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Twist Compression Tester is a laboratory tribology instrument designed to eval... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
