High-Collimation AAA-Grade Solar Simulator
Getaquote：
Whats/App: +86 181 0160 0864
TheHigh-Collimation AAA-Grade Solar Simulatoris designed to provide a concentrated, high-irradiance light source that closely replicates natural sunlight within a defined area. You use this simulator to perform precision testing of photovoltaic cells, photothermal materials, and optical or biochemical samples under controlled solar conditions. Rated at AAA level, the simulator ensures high spectral accuracy, stable illumination, and excellent repeatability, enabling reliable characterization of solar cells such as dye-sensitized (DSSC) and perovskite (PSC) types, as well as photothermal and environmental experiments.
Applications
Solar Cell Characterization: Performance testing of DSSC, PSC, and crystalline silicon cells.
Photothermal Conversion Studies: Assessing efficiency of thermal energy harvesting materials.
Photovoltaic Material Testing: Evaluating degradation, stability, and conversion efficiency of new materials.
Accelerated Optical Catalytic Degradation: Investigating long-term light-induced effects on coatings and catalysts.
Biochemical and Cosmetic Testing: Evaluating light-sensitive reactions in skin or cosmetic products.
Environmental Research: Simulating concentrated solar irradiation for climate and material studies.
Standards
(1) IEC 60904-9 – Photovoltaic Devices: Requirements for Solar Simulators
(2) ASTM E927 – Standard Guide for Laboratory Simulation of Solar Radiation
(3) IEC 60904-3 – Measurement of Photovoltaic Current-Voltage Characteristics
(4) ISO 9060 – Solar Irradiance Measurement and Calibration Standards
(5) ASTM G173 – Reference Solar Spectra for Testing
(6) JIS C 8912 – Solar Simulator Performance Guidelines
Features
High Spectral Accuracy: You reproduce the AM1.5G solar spectrum with Grade A precision.
Concentrated Light Source: Ensures high irradiance for accelerated material testing.
Illuminance Adjustability: You can regulate intensity to match experimental conditions.
Stable and Repeatable Output: Provides consistent illumination for reliable results.
Compact Design: Suitable for laboratories with limited installation space.
Independent Feedback Control: Each lamp uses EPS real-time control for constant output.
Technical Parameters
| Parameter | Details |
|---|---|
| Light Source Type | Short-arc high-pressure xenon lamp |
| Light Source Lifetime | 1000h+ |
| Light Source Warranty | 800h |
| Number of Light Sources | Matched according to irradiation area and irradiance |
| Irradiation Area | D100mm, D300mm, D500mm, D600mm, D700mm, D900mm (custom sizes available) |
| Maximum Irradiance in Effective Spot | ≥9W/mm² |
| Minimum Irradiance in Effective Spot | ≥2W/mm² |
| Average Irradiance in Effective Spot | ≥4W/mm² |
| Focus Distance | ≥2m |
| Reflector Aperture | - For D300mm irradiation area: ≥300mm- For D600mm irradiation area: ≥500mm- For D900mm irradiation area: ≥890mm |
| Spectral Range | 300–1700nm |
| Light Emission Direction | Horizontal output |
| Spectral Matching Degree | Grade A (AM1.5G) |
| Instability | LT≤±2%; Grade A |
| Equipment Dimensions | Approximately 4.15×2.6m (L×W×H) |
| Arrangement | For 13 lamp heads: at least 1 head faces directly forward, with outer heads evenly distributed around the perimeter |
Accessoriess
(1) High-pressure xenon lamp modules
(2) Peripheral lamp array assemblies
(3) Optical reflectors and lenses for uniform illumination
(4) EPS feedback and control units
(5) Data acquisition interface
(6) Cooling and heat management system
Test Procedures
Mount the sample or PV module at the designated test position.
Select the desired irradiance level, illumination duration, and spectral range.
Power on the simulator and allow EPS feedback to stabilize output.
Monitor real-time irradiance via the data acquisition system.
Conduct measurements for electrical output, photothermal conversion, or material degradation.
Record and analyze results using connected software or measurement instruments.
Complete the test and power down the simulator according to safety protocols.
Conclusion
You use theHigh-Collimation AAA-Grade Solar Simulatorto provide precise, high-intensity solar illumination for laboratory testing of photovoltaic cells, photothermal materials, and light-sensitive compounds. Its AAA-rated spectral performance, adjustable irradiance, and stable output enable reliable, repeatable testing across multiple applications. With compact design, independent lamp control, and flexible illuminated areas, this simulator is ideal for R&D, certification, and material performance evaluation.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Total Knee Prosthesis Wear Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Total Knee Prosthesis Wear Testing Machine is a specialized testing device des... |
 |
Filter media test rig according to ISO 16890 | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Filter Media Test Rig is designed for characterization of filter media and sma... |
 |
Suture Needle Cutting Force Tester YY 0166 | The Cutting Force Tester for Suture Needles is a precision instrument specifically used to detect the force required by medical suture needles duri... |
 |
Catheter Friction Tester / Catheter Friction Equipment | Standard YY/T 1536 - 2017 TCAMDI 021 - 2019 Main Uses The catheter friction performance tester is a professional instrument used to detect the ... |
 |
PLC liquid crystal touch impact testing machine (simple suspension) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk A PLC LCD Touch Impact Testing Machine (Simple Suspension) is a type of pendulum i... |
