Molten Metal Splash Impact Tester

Get a quote：

Whats/App: +86 181 0160 0864

Projections of molten metal drops at a point on a vertical oriented test specimen and measurement of the number of the drops required to cause a 40 K temperature rise in a sensor behind the specimen.

Application

You can use this tester to determine the impact resistance and protective capability of materials exposed to molten metal splashes. Typical applications include:

(1) Testing protective clothing, gloves, and aprons used in foundries or metal processing industries.

(2) Evaluating thermal insulation panels or shields used in steel mills or metal casting facilities.

(3) Quality control and R&D for high-temperature resistant coatings and fabrics.

(4) Safety certification testing for compliance with international molten metal protection standards.

(5) Material performance comparison for industrial safety evaluations.

Standard：

AQ 6103

ISO 9150:1988

CSN EN 348:1992

GB 8965.2:2009

GB/T 17599:1998

Features：

Drop guide to collect the drops and to guide them towards the vertically oriented test specimen.

Senor for measuring the temperature linked to a recording device.

Holding frame and counterweights for the test specimen.

Motor speed can be adjust so that the steel rod is fed at the rate of (10 f 1) g/mm.

Needle valves adjust the O2 and acetylene flow rate.

LCD Screen display and control the motor speed.

Technical Parameters：

Size	700mm (W) X 850mm (H) X 500mm (D)
Weight	42kg
Installation requirements	220V, 50HZ, 5A
Environmental Requirements	Temperature (20+2)degree C, Humidity (65+5)%
Gas requirements	oxygen, acetylene

Test Procedures

(1) Secure the vertically oriented test specimen in the holding frame.

(2) Adjust the motor feed rate according to material thickness and standard requirements.

(3) Set the oxygen and acetylene flow rates using the needle valves.

(4) Start the test and allow molten metal droplets to impact the specimen.

(5) Monitor the temperature rise behind the specimen until a 40 K increase is reached; record the number of droplets required.

(6) Compile results for material evaluation and certification purposes.

Maintenance Information

Clean the drop guide and sensor surfaces after each test.

Inspect gas connections and needle valves for leaks or wear.

Verify motor feed rate calibration periodically.

Store in a dry environment to prevent corrosion.

Replace any worn or damaged parts immediately to ensure accuracy and safety.

Conclusion

The Molten Metal Splash Impact Tester provides accurate, standardized measurement of material resistance to molten metal splashes. Its adjustable motor feed, precise temperature sensor, and compliance with international standards make it ideal for R&D, quality control, and safety certification in metal processing and high-temperature industries.

Другие товары поставщика

	Fabric sensory quality evaluation tester	Product innovation: The "feel and look", or so-called "sensory perception", of fabrics and knitted fabrics, nonwovens, paper products, leather and...
	Particle Abrasion Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Particle Abrasion Tester (Q-4D) is a precision instrument designed to measure ...
	Cork Puncture and Chip Detection Instrument	The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ...
	Shoelace Abrasion Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Shoelace Abrasion Tester is designed to evaluate the wear resistance of shoela...
	Intramedullary Nails/Bone Screw Static Torque Testing Machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Intramedullary Nails/Bone Screw Static Torque Testing Machine is a specialized...

Все товары поставщика

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...