FAA Oil Burner for Insulation Burn Through Resistance

Get a quote：

Whats/App: +86 181 0160 0864

Web: gellowen.co.uk

The Flame Penetration Fuel Test System for Thermal and Acoustic Insulation Materials is a dedicated fire testing platform designed to evaluate flame penetration behavior, combustion performance, and thermal response of aerospace insulation materials under controlled aviation fuel fire exposure. The system integrates the FAA-approved NexGen aviation fuel burner with a specialized flame penetration test apparatus and a dynamic loading motion system, enabling realistic simulation of aircraft fire scenarios while accurately controlling and monitoring fuel and air parameters. The modular design supports both current testing requirements and future FAA technical upgrades.

Application

This system is applicable to aviation fuel fire testing of a wide range of aerospace materials, particularly those used in aircraft cabin structures and thermal management systems, including:

Thermal insulation materials

Acoustic insulation materials

Composite sandwich panels

Cabin wall panels

Ceiling liners

Interior partitions

Fire barrier layers

Multi-layer insulation assemblies

The NexGen burner provides standardized aviation fuel flame exposure, while the configured flame penetration apparatus enables direct assessment of whether flames can penetrate insulation layers under high-temperature conditions.

Standards

The system is compatible with the following international aerospace fire testing standards:

BSS 7387 – Flame spread and combustion behavior of aerospace materials

AITM 2.0056 – Heat release rate measurement of aerospace materials using cone calorimeter

FAR Part 25 Appendix F Part VII – Heat release and fire performance requirements for aircraft cabin materials

Parameters

Item	Specification
Overall dimensions	1500 mm (W) × 1800 mm (H) × 900 mm
System weight	150 kg
Power requirement	220 V, 10 A
Operating temperature	10°C to 35°C
Fuel type	Aviation kerosene
Air supply	Minimum 120 PSI compressed air
Flame temperature capability	≥ 2000 ± 50 ℉
Heat flux output	≥ 10.6 W/cm²
Temperature control bath	≥ 2 × 0.14 m³

Features

Incorporates the FAA-approved NexGen aviation fuel burner, developed to replace discontinued legacy burners (Park DPL 3400. Lennox OB-32. Carlin 200 CRD).

Retains the operational principles of previous burner generations while enabling more precise measurement of fuel and air test parameters.

Modular architecture facilitates future FAA upgrades without full system replacement.

The burner cone is fabricated from corrosion-resistant and high-temperature alloy to ensure durability in severe thermal conditions.

The NexGen burner includes key components such as baffle, fuel nozzle, igniter, fuel rail, mounting plates, ventilation duct, housing, muffler, and acoustic resistance unit.

Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air pressure regulator, and air temperature sensor for stable control.

A temperature-controlled ice bath system (≥ 2 × 0.14 m³) allows regulation of fuel temperature prior to combustion.

Flame characteristics can be adjusted by modifying fuel nozzle configuration and air pressure input to meet different standard requirements.

The burner is covered with a thermal insulation blanket to protect fuel lines and the burner body.

Capable of delivering flame temperature of at least 2000 ± 50 ℉ and heat flux of at least 10.6 W/cm².

Mounted on a heavy-duty steel frame that supports both horizontal and vertical specimen installation.

Calibration utilizes a thermocouple comb composed of seven grounded K-type thermocouples (1.6 mm diameter, ceramic-insulated, metal-sheathed, 30 AWG wire), fixed on an angle bracket for standardized placement on the specimen frame.

Includes a radiant heat flux sensor with cooling system, installed on a fixed support bracket for reliable measurement.

Другие товары поставщика

	Geomembrane Hydrostatic and Permeability Tester丨Geotextile Test Machine	Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile (one cl...
	Cone Calorimeter / Cone calorimetric test equipment	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Cone Calorimeter is a precision fire-testing instrument designed to evaluate m...
	Seat Thermal Manikin	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Seat Thermal Manikin is designed to evaluate thermal comfort and humidity mana...
	Constant elongation stress meter	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk A Constant Elongation Stress Meter is a specialized testing device designed to mea...
	Probe-Type Material Surface Wear Scar Tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Probe-Type Material Surface Wear Scar Tester is a precision device designed fo...

Все товары поставщика

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...