Automated Filter Element Test System
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
Test System for production control of filter elements (e.g. exhaust filter, HEPA filter)
For the purpose of 100% inspection of the integral filter separation efficiency during production, especially for exhaust filters and HEPA filters used in vacuum cleaners and mobile air cleaners.
Production control demands for short test cycles while using robust, compact, service-reduced and safe technologies. A test cycle includes therefore the supply, the analytical characterisation and the re-moval of the test specimen. Due to its measurement concept and high degree of automatisation, the system enables reliable testing with measurement times of 30 s.
To ensure a full traceability, determined test data can be integrated directly into in-house databases by combining the filter test system with techniques for test specimen identification (e.g., bar code or QR code scanner).
Applications
production control of integral separation efficiency of exhaust particle filters (GPF, DPF)
quality control of HEPA filters or filter cartridges of e.g. industrial vacuum systems
research and development on any small air filter elements
Standards
This system meets the requirements of:
(1) GB/T 14295-2019 – Air filters.
(2) GB/T 13554-2020 – High-efficiency air filters.
(3) GB/T 6165-2021 – HEPA filter performance testing: efficiency and resistance.
(4) ISO 29463-4 – High-efficiency air filter performance.
(5) ISO 16890 – Air filter performance standard.
(6) EN 1822 – HEPA and ULPA filter performance testing.
(7) ISO 5011 – Engine air intake filter testing.
Principle
A defined volumetric flow rate is sucked by a controlled blower from the environment through a HEPA inlet filter, the test duct and a safety filter. The test duct is composed of three functional sections, i.e., sections for i) the generation and characterisation of the test aerosol (upstream aerosol), ii) the incorporation of the test specimen (specimen adapter) and iii) the characterisation of the downstream aerosol.
Technical data
| Parameter | Unit | Value |
|---|---|---|
| Test flow rate | m³/h | 40 … 440 (up to 1200 optional) |
| Measuring range, particle size (OPC) | µm | 0.1 … 1.0 |
| Measuring range, particle size (CPC) | µm | 0.001 … 1.0 |
| Test cycle duration | s | approx. 30 |
| Test aerosol | – | Customer-specific (e.g., DEHS or others) |
| Dimensions of test specimen | – | Diameter ≤ 300 mm; Length ≤ 850 mm |
| Compressed air supply | bar | 4.0 … 6.0 |
| Power supply | – | 3 × 400 VAC, hard-wired; rated current 30 A; pre-fuse 32 A |
| Inner diameter of duct | mm | 150 |
| Aerosol-analytical instruments | – | Customer-specific (e.g., OPC, CPC, etc.) |
| Integrated sensors | – | Temperature, relative humidity, air pressure |
| Dimensions (W × H × D) | mm | 2800 × 2100 × 1200 |
| Weight | kg | approx. 800 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a... |
 |
Helmet Projection and Surface Friction tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet projection and surface friction tester is a device used to test the fri... |
 |
Absorption tester ISO 9073 | Product Introduction: STD provides easy and reliable measurement of absorbance. This precision absorber uses the STD system's patented liquid inte... |
 |
Helmets Vertical SpacingInfrared - positioning Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet vertical spacing infrared positioning tester is a specialized instrumen... |
 |
Battery Powder Compaction Density Measurement System | The Battery Powder Compaction Density Measurement System is a precision testing system designed to determine the tapped density and compaction beha... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
